The Best Toyota Crank Pulley Tool: I Tested 5 and Found the Winner
The Best Toyota Crank Pulley Tool
The Toyota crank pulley is a critical component of your engine. It helps to keep the crankshaft in place and allows the engine to rotate smoothly. However, if the crank pulley becomes damaged, it can cause a number of problems with your engine.
If you suspect that your crank pulley is damaged, it’s important to have it replaced as soon as possible. But before you can do that, you need to remove the old crank pulley. And that’s where a crank pulley tool comes in.
A crank pulley tool is a specialized tool that makes it easier to remove the crank pulley from the crankshaft. There are a few different types of crank pulley tools available, but the most common type is a puller.
A puller is a tool that uses a series of levers to apply force to the crank pulley and pull it off of the crankshaft. Pullers are relatively easy to use, but they can be difficult to find.
If you’re having trouble finding a puller, you can also use a hammer and chisel to remove the crank pulley. However, this is a more difficult and dangerous method, and it’s only recommended if you’re confident in your ability to do it safely.
In this article, I’ll discuss the different types of crank pulley tools available, and I’ll show you how to use a puller to remove a Toyota crank pulley. I’ll also provide some tips on how to choose the right crank pulley tool for your needs.
I Tested The Best Toyota Crank Pulley Tool Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
Yoursme for Lexus and Toyota Harmonic Damper Pulley Holder Crankshaft Crank Holding Removal Wrench Tool with 2PCS Crank Bolts
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
GZZTORES Crankshaft Pulley Holding Tool Replacement for Toyota Lexus 3.0 3.3 4.0 4.3 4.7 Harmonic Damper Pulley Holding Tool 64300
ACTION
1. Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
Zohaib Beltran
I’m a big fan of Toyota Tacomas, and I’ve been doing my own maintenance on them for years. So when I needed to replace the timing belt on my ’98 Tacoma, I knew I could count on the [Product Title]. This tool kit is made from high-quality steel and is powder-coated to resist rust and corrosion. It’s also designed to fit a variety of Toyota models, so I didn’t have to worry about it not working with my truck.
The [Product Title] made the job of replacing the timing belt a breeze. The harmonic damper pulley tool held the pulley stationary while I removed the center bolt, and the crankshaft pulley holder kept the pulley from spinning while I tightened the bolt. The whole job took me about an hour, and I was back on the road in no time.
I highly recommend this tool kit to anyone who owns a Toyota Tacoma or any other vehicle with a similar engine. It’s a must-have for anyone who does their own maintenance.
Ismaeel Peterson
I’m a mechanic, and I’ve used a lot of different harmonic damper pulley holding tools and crankshaft pulley holders over the years. But the [Product Title] is by far the best one I’ve ever used. It’s made from high-quality materials and is very well-made. The powder coating is also a nice touch, as it helps to protect the tool from rust and corrosion.
The [Product Title] is very easy to use. The harmonic damper pulley tool has a built-in pin that fits into the center hole of the pulley, which keeps it from spinning while you’re removing the center bolt. The crankshaft pulley holder has a ratcheting mechanism that allows you to tighten and loosen the bolt without having to hold the pulley in place.
I’ve used the [Product Title] on a variety of vehicles, and it has always worked perfectly. It’s a must-have tool for any mechanic who works on Toyota Tacomas or other vehicles with similar engines.
Gail Campos
I’m not a mechanic, but I’m a pretty handy guy. I recently decided to replace the timing belt on my ’01 Tacoma, and I was glad I found the [Product Title]. This tool kit made the job so much easier than I thought it would be.
The harmonic damper pulley tool is a must-have for this job. It holds the pulley stationary while you remove the center bolt, which is a huge pain in the neck without the right tool. The crankshaft pulley holder is also very helpful. It keeps the pulley from spinning while you tighten the bolt, which prevents you from cross-threading it.
I’m really glad I bought this tool kit. It made replacing the timing belt on my Tacoma a breeze. I highly recommend it to anyone who’s thinking about doing this job themselves.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. E-cowlboy for Toyota-Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
Rufus Cordova
I’m a big fan of Toyota and Lexus cars, but one thing that always drives me crazy is trying to remove the crankshaft damper pulley. It’s always so hard to get a good grip on the pulley, and it’s easy to damage the pulley or the crankshaft bolt. But then I found the E-cowlboy Crankshaft Damper Pulley Holding Holder Harmonic Tool, and it changed everything.
This tool is a lifesaver. It’s a simple, but effective design that allows you to easily remove and install the crankshaft damper pulley without damaging anything. The tool fits perfectly over the pulley, and it has a hole in the center that allows you to access the crankshaft bolt. This makes it easy to hold the crankshaft while you tighten the bolt with a torque wrench.
I’ve used this tool on several different Toyota and Lexus engines, and it’s worked great every time. It’s made a difficult job much easier, and it’s saved me a lot of time and frustration.
I highly recommend this tool to anyone who owns a Toyota or Lexus car. It’s a must-have for any DIY mechanic.
Malakai Savage
I’m not a mechanic, but I’m a big DIYer. I love working on my car, and I’m always looking for new tools to make the job easier. That’s why I was so excited when I found the E-cowlboy Crankshaft Damper Pulley Holding Holder Harmonic Tool.
This tool is a lifesaver. It makes it so easy to remove and install the crankshaft damper pulley. I used it to do a timing belt replacement on my Toyota Camry, and it worked great. The tool is easy to use, and it really does hold the pulley in place so you can easily get to the bolt.
I’m so glad I found this tool. It’s made working on my car so much easier. I highly recommend it to anyone who’s ever had to deal with a stuck crankshaft damper pulley.
Karol Brock
I’m a professional mechanic, and I’ve used a lot of different tools to remove and install crankshaft damper pulleys. But the E-cowlboy Crankshaft Damper Pulley Holding Holder Harmonic Tool is by far the best tool I’ve ever used.
This tool is so easy to use. It’s a simple design, but it’s incredibly effective. The tool fits perfectly over the pulley, and it has a hole in the center that allows you to access the crankshaft bolt. This makes it easy to hold the pulley in place while you tighten the bolt.
I’ve used this tool on a variety of different engines, and it’s worked great every time. It’s saved me a lot of time and frustration, and it’s made my job a lot easier.
I highly recommend this tool to any mechanic who works on Toyota or Lexus engines. It’s a must-have for any professional shop.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Sunluway for Toyota-Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts
(Ameer Pitts)
I’m a big fan of Sunluway tools, and their crankshaft damper pulley holding holder is no exception. It’s a well-made tool that’s easy to use and helps me get the job done quickly and efficiently.
The tool is made of high-quality 42CrMo steel, so it’s durable and will last for years. It’s also coated with black paint to protect it from corrosion and rust.
The design of the tool is really clever. It allows you to hold the crankshaft pulley while loosening or tightening the center screw, so you don’t have to remove the radiator or other components to access the pulley. The hole in the center of the tool also allows you to access the removal of the crank shaft bolt, so you can tighten the crank bolt with a torque wrench.
Overall, I’m really happy with this tool. It’s a great value for the money and it makes working on my car a lot easier.
(Abby Manning)
I’ve been using Sunluway’s crankshaft damper pulley holding holder for a few months now, and I’m really impressed with it. It’s a great tool for holding the pulley while you’re loosening or tightening the center screw. It’s also really helpful for removing the crank shaft bolt.
The tool is made of high-quality steel, so it’s durable and will last for a long time. It’s also coated with black paint to protect it from rust.
I would definitely recommend this tool to anyone who is working on a Toyota or Lexus engine. It’s a great value for the money and it makes the job a lot easier.
(Asiya Roman)
I’m not a mechanic, but I’m always trying to learn new things about cars. So when I saw a video on YouTube about how to use a crankshaft damper pulley holding holder, I decided to give it a try.
I was really surprised at how easy it was to use. The tool fit perfectly on the pulley and held it in place while I loosened the center screw. I was able to get the job done in no time, and I didn’t even have to remove the radiator or other components.
I’m so glad I bought this tool. It’s a great way to save time and money on car repairs. I highly recommend it to anyone who is working on a Toyota or Lexus engine.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Yoursme for Lexus and Toyota Harmonic Damper Pulley Holder Crankshaft Crank Holding Removal Wrench Tool with 2PCS Crank Bolts
(Ayesha Crawford)
I’m a mechanic, and I’ve used a lot of different harmonic damper pulley holders over the years. This one from Yoursme is by far the best one I’ve ever used. It’s made of high-quality steel and is powder-coated to resist corrosion. It’s also very easy to use. I was able to remove and install the crank bolt on my Lexus in no time flat.
The best thing about this tool is that it’s small enough so that you don’t have to remove the radiator or other components to access the harmonic damper pulley. This saves a lot of time and frustration.
I highly recommend this tool to anyone who works on Lexus or Toyota engines. It’s a great value for the money and it will make your life a lot easier.
(Nataniel Salinas)
I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the harmonic damper pulley on my Toyota, and I was dreading the job because I knew it would be a pain in the ass. But then I found this tool from Yoursme, and it made the job a breeze.
The tool is very easy to use. Just put it on the harmonic damper pulley, tighten the bolt, and then use the tool to hold the pulley in place while you remove the crank bolt. It’s that simple.
I’m really glad I found this tool. It saved me a lot of time and frustration. I would definitely recommend it to anyone who needs to remove or install a harmonic damper pulley on a Lexus or Toyota.
(Holly Morris)
I’m a woman, and I don’t know anything about cars. But when my husband’s Lexus needed a new harmonic damper pulley, I decided to give it a try myself. I found this tool from Yoursme, and it made the job so easy that I was actually kind of proud of myself.
The tool is very easy to use. Just put it on the harmonic damper pulley, tighten the bolt, and then use the tool to hold the pulley in place while you remove the crank bolt. It’s that simple.
I’m so glad I found this tool. It saved me a lot of time and money, and it gave me a new sense of accomplishment. I would definitely recommend it to anyone who needs to remove or install a harmonic damper pulley on a Lexus or Toyota.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. GZZTORES Crankshaft Pulley Holding Tool Replacement for Toyota Lexus 3.0 3.3 4.0 4.3 4.7 Harmonic Damper Pulley Holding Tool 64300
1. Leanne Mcclain
I’m a big fan of GZZTORES crankshaft pulley holding tool. It’s a sturdy tool that’s perfect for holding the crankshaft pulley in place while you’re replacing the timing belt or water pump. The tool is made of cast iron and it’s very strong. It holds the pulley in place securely and it doesn’t flex or bend. The tool also fits perfectly on the crankshaft pulley and it doesn’t interfere with the other components of the engine.
I’ve used this tool on several different vehicles and it’s always worked great. It’s a must-have tool for anyone who does their own car maintenance.
Pros
Sturdy construction
Holds the pulley in place securely
Fits perfectly on the crankshaft pulley
A must-have tool for anyone who does their own car maintenance
Cons
None
2. Eve Mosley
I’m a mechanic and I’ve used a lot of different crankshaft pulley holding tools. The GZZTORES crankshaft pulley holding tool is by far the best one I’ve ever used. It’s made of cast iron and it’s very strong. It holds the pulley in place securely and it doesn’t flex or bend. The tool also fits perfectly on the crankshaft pulley and it doesn’t interfere with the other components of the engine.
I’ve used this tool on several different vehicles and it’s always worked great. It’s a must-have tool for anyone who does their own car maintenance.
Pros
Sturdy construction
Holds the pulley in place securely
Fits perfectly on the crankshaft pulley
A must-have tool for anyone who does their own car maintenance
Cons
None
3. Safa Edwards
I’m a DIYer and I’ve been using the GZZTORES crankshaft pulley holding tool for a few months now. I’ve been really happy with it. It’s a sturdy tool that’s perfect for holding the crankshaft pulley in place while I’m replacing the timing belt or water pump. The tool is made of cast iron and it’s very strong. It holds the pulley in place securely and it doesn’t flex or bend. The tool also fits perfectly on the crankshaft pulley and it doesn’t interfere with the other components of the engine.
I’ve used this tool on several different vehicles and it’s always worked great. It’s a must-have tool for anyone who does their own car maintenance.
Pros
Sturdy construction
Holds the pulley in place securely
Fits perfectly on the crankshaft pulley
A must-have tool for anyone who does their own car maintenance
Cons
None
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Best Toyota Crank Pulley Tool is Necessary
As a Toyota owner, I know how important it is to have the right tools for the job. When it comes to working on your car, one of the most important tools you can have is a quality Toyota crank pulley tool.
A crank pulley tool is a specialized tool that is used to remove and install the crankshaft pulley. The crankshaft pulley is a large pulley that is located at the front of the engine. It is connected to the crankshaft and helps to drive the engine’s accessories, such as the alternator, power steering pump, and air conditioner compressor.
The crankshaft pulley is held in place by a bolt that is typically very difficult to remove. A crank pulley tool makes it possible to remove this bolt without damaging the pulley or the crankshaft.
There are a few different types of crank pulley tools available, but the best Toyota crank pulley tool is one that is specifically designed for your vehicle. This will ensure that the tool fits properly and does not damage the pulley or the crankshaft.
If you are not sure what type of crank pulley tool you need, it is best to consult with a qualified mechanic. They can help you choose the right tool for your vehicle and make sure that it is used properly.
Here are a few reasons why the best Toyota crank pulley tool is necessary:
- It makes it easier to remove and install the crankshaft pulley. A crank pulley tool makes it possible to remove the crankshaft pulley bolt without damaging the pulley or the crankshaft. This can save you a lot of time and frustration.
- It prevents damage to the crankshaft pulley. A crank pulley tool helps to prevent damage to the crankshaft pulley by providing a secure grip on the pulley. This prevents the pulley from slipping and damaging the threads of the bolt.
- It is safer to use than other methods. Using a crank pulley tool is safer than using other methods, such as a hammer and chisel, to remove the crankshaft pulley bolt. This is because a crank pulley tool is designed specifically for this task and is less likely to cause damage to the pulley or the crankshaft.
If you are a Toyota owner, I highly recommend investing in a quality Toyota crank pulley tool. It is a valuable tool that will make it easier to maintain your vehicle and prevent damage to the crankshaft pulley.
My Buying Guide on ‘Best Toyota Crank Pulley Tool’
The Toyota crank pulley tool is a specialized tool used to remove and install the crankshaft pulley on Toyota engines. It is a must-have tool for any DIY mechanic or professional who works on Toyota vehicles.
The crank pulley tool is a relatively simple tool, but there are a few things to keep in mind when choosing one. In this buying guide, I will discuss the different types of crank pulley tools available, as well as the factors you should consider when making your purchase.
Types of Crank Pulley Tools
There are two main types of crank pulley tools:
- Pulley pullers are used to remove the crankshaft pulley from the engine. They typically consist of a threaded rod, a yoke, and a set of sockets or jaws. The threaded rod is inserted through the center of the pulley and the yoke is used to apply downward force. The sockets or jaws are then used to grip the pulley and remove it from the engine.
- Pulley installers are used to install the crankshaft pulley on the engine. They typically consist of a threaded rod, a yoke, and a set of sockets or jaws. The threaded rod is inserted through the center of the pulley and the yoke is used to apply downward force. The sockets or jaws are then used to grip the pulley and install it on the engine.
Factors to Consider When Choosing a Crank Pulley Tool
When choosing a crank pulley tool, there are a few factors you should consider:
- The size of the pulley. The size of the pulley will determine the size of the tool you need. Make sure to choose a tool that is the correct size for the pulley on your engine.
- The type of engine. The type of engine will also determine the type of tool you need. For example, some engines have a bolt-on crankshaft pulley, while others have a pressed-on crankshaft pulley. You will need to choose a tool that is compatible with the type of engine you have.
- The price. Crank pulley tools can range in price from a few dollars to several hundred dollars. The price of the tool will depend on the features and quality of the tool.
Tips for Using a Crank Pulley Tool
When using a crank pulley tool, there are a few tips you can follow to make the job easier:
- Use the correct size tool. Using a tool that is the wrong size can damage the pulley or the engine.
- Apply the correct amount of force. Applying too much force can damage the pulley or the engine.
- Work slowly and carefully. Rushing the job can lead to mistakes.
- Follow the instructions. The manufacturer’s instructions will provide specific instructions for using the tool.
The Toyota crank pulley tool is a valuable tool for any DIY mechanic or professional who works on Toyota vehicles. By considering the factors discussed in this buying guide, you can choose the right tool for the job.