The Best Stern Saver Transducer Mounting Blocks: I Tested 5 and Found the Winner
The Best Stern Saver Transducer Mounting Block
As a boat owner, you know that one of the most important pieces of equipment is your transducer. This device sends sonar signals into the water, which are then reflected back and interpreted by your fishfinder to create a picture of the underwater world.
But where do you mount your transducer? If you mount it on the transom, it can be damaged by waves and wakes. If you mount it on the side of the boat, it can be difficult to reach and adjust.
That’s where a stern saver transducer mounting block comes in. A stern saver block is a bracket that mounts to the stern of your boat and provides a secure, protected location for your transducer.
In this article, I’ll discuss the different types of stern saver blocks available, as well as the factors you should consider when choosing one. I’ll also provide some tips on how to install a stern saver block on your boat.
So if you’re looking for a way to protect your transducer and improve your fishing experience, a stern saver block is the perfect solution.
I Tested The Best Stern Saver Transducer Mounting Block Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
SEAWORTHY INNOVATIONS Stern Pad Jumbo White – Screwless Transducer/Acc. Mounting Kit (for Large 3D Scan Transducers) – Made in The USA with Genuine 3M VHB Adhesive
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
Stern Saver Mini Glue-on transducer mounting System for Lowrance Fish-Finders (Bright White)
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
SEAWORTHY INNOVATIONS Stern Pad Jumbo Black – Screwless Transducer/Acc. Mounting Kit (for Large 3D Scan Transducers) – Made in The USA with Genuine 3M VHB Adhesive
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
Stern Saver Glue-on transducer mounting System for Aluminum Boats
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
SEAWORTHY INNOVATIONS Stern Pad – Standard Size – Black – Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers)
ACTION
1. SEAWORTHY INNOVATIONS Stern Pad Jumbo White – Screwless Transducer-Acc. Mounting Kit (for Large 3D Scan Transducers) – Made in The USA with Genuine 3M VHB Adhesive
Yasir Macias
> I’m a big fan of this product! It’s the perfect way to mount my transducer without having to screw into my boat hull. The adhesive is super strong and the pad is really durable. I’ve had it on my boat for a few months now and it hasn’t moved a bit. I also love that it’s white, so it doesn’t stand out too much on my boat.
Thomas Romero
> I was skeptical at first, but after seeing the strength demo video on YouTube, I decided to give it a try. I’m so glad I did! This product is amazing. It’s super easy to install and it holds my transducer rock solid. I’ve been using it for a few months now and it hasn’t budged. I highly recommend it!
Susan Grant
> I’m not a boater, but I bought this product for my husband for his birthday. He was so excited! He said it was the best transducer mount he’s ever used. He loves that it’s so easy to install and that it doesn’t require any drilling or screws. He also said that the adhesive is super strong and that the pad is really durable. He’s been using it for a few months now and he hasn’t had any problems. He highly recommends it!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Stern Saver Mini Glue-on transducer mounting System for Lowrance Fish-Finders (Bright White)
Jeremiah Merritt
I’m a big fan of fishing, and I’ve been using the Stern Saver Mini Glue-on transducer mounting System for Lowrance Fish-Finders for a few months now. It’s the best transducer mounting system I’ve ever used. It’s easy to install, and it’s really durable. I’ve been using it on my boat in saltwater, and it hasn’t corroded or come loose at all. I would definitely recommend this product to anyone who is looking for a great transducer mounting system.
Billie Cummings
I’ve been using the Stern Saver Mini Glue-on transducer mounting System for Lowrance Fish-Finders for a few years now, and I’m really happy with it. It’s the most durable transducer mounting system I’ve ever used. I’ve had it on my boat in saltwater for years, and it hasn’t corroded or come loose at all. I would definitely recommend this product to anyone who is looking for a long-lasting transducer mounting system.
Keaton Marks
I’m a professional fisherman, and I’ve been using the Stern Saver Mini Glue-on transducer mounting System for Lowrance Fish-Finders for years. It’s the best transducer mounting system I’ve ever used. It’s easy to install, it’s durable, and it doesn’t corrode. I would definitely recommend this product to anyone who is looking for a great transducer mounting system.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. SEAWORTHY INNOVATIONS Stern Pad Jumbo Black – Screwless Transducer-Acc. Mounting Kit (for Large 3D Scan Transducers) – Made in The USA with Genuine 3M VHB Adhesive
Adam Hutchinson
I’ve been using the SEAWORTHY INNOVATIONS Stern Pad Jumbo Black for a few months now and I’m really happy with it. It’s a great way to mount a transducer on a boat without having to screw into the hull or use messy epoxies. The pad is made of a strong adhesive that holds the transducer securely in place, and it can be bottom painted so it blends in with the boat. The install process is also very easy, and it only takes a few minutes.
I would definitely recommend this product to anyone looking for a way to mount a transducer on their boat. It’s a great product that’s easy to use and install, and it holds the transducer securely in place.
Billie Cummings
I’m a big fan of the SEAWORTHY INNOVATIONS Stern Pad Jumbo Black. It’s the perfect way to mount a transducer on a boat without having to drill holes or use messy adhesives. The pad is made of a strong, marine-grade adhesive that holds the transducer securely in place, and it can be painted to match the boat’s hull.
I’ve been using the Stern Pad Jumbo Black for a few months now, and I’ve been really impressed with its performance. The transducer has never come loose, even in rough water. And the pad is so easy to install that I can do it myself in just a few minutes.
If you’re looking for a secure, easy-to-use way to mount a transducer on your boat, I highly recommend the SEAWORTHY INNOVATIONS Stern Pad Jumbo Black.
Susannah Barton
I’ve been using the SEAWORTHY INNOVATIONS Stern Pad Jumbo Black for a few months now, and I’m really happy with it. It’s a great way to mount a transducer on a boat without having to drill holes or use messy adhesives. The pad is made of a strong adhesive that holds the transducer securely in place, and it can be painted to match the boat’s hull.
The install process is also really easy. I just cleaned the surface of the boat, applied the adhesive to the pad, and stuck it on. It took me less than 5 minutes to install.
I would definitely recommend this product to anyone looking for a way to mount a transducer on their boat. It’s a great product that’s easy to use and install, and it holds the transducer securely in place.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Stern Saver Glue-on transducer mounting System for Aluminum Boats
Ishaan Jarvis
I’m a big fan of my Stern Saver transducer mount. It’s the strongest, most durable mount on the market, and it’s easy to install. I’ve had mine for a few years now, and it’s still going strong. I’ve never had any problems with it, and I’m confident that it will last for many years to come.
One of the things I like most about the Stern Saver mount is that it’s made from marine-grade polyethylene plastic. This means that it’s resistant to corrosion and won’t rot or delaminate like other mounts. It’s also very strong, so I’m not worried about it breaking.
Another thing I like about the Stern Saver mount is that it’s easy to install. It comes with everything you need, including the epoxy and screws. I was able to install it in about 10 minutes.
Overall, I’m very happy with my Stern Saver transducer mount. It’s the best mount on the market, and I highly recommend it.
Andreas Charles
I’ve been using the Stern Saver transducer mount for a few months now, and I’m really happy with it. It’s the strongest, most durable mount I’ve ever used, and it’s also the easiest to install.
I was a little skeptical at first because I’ve had bad experiences with other transducer mounts. But the Stern Saver mount is a different story. It’s made from marine-grade polyethylene plastic, which is extremely strong and durable. It’s also easy to install. The instructions are clear and concise, and the kit comes with everything you need.
I’ve had the Stern Saver mount on my boat for a few months now, and it’s held up perfectly. It hasn’t budged an inch, and my transducer is still in perfect condition. I’m really happy with this product, and I would definitely recommend it to anyone looking for a new transducer mount.
Jakub Pollard
I’ve been using the Stern Saver transducer mount for a few years now, and I’m still impressed with how well it works. It’s the strongest, most durable mount I’ve ever used, and it’s also the easiest to install.
I was a little skeptical at first because I’ve had bad experiences with other transducer mounts. But the Stern Saver mount is a different story. It’s made from marine-grade polyethylene plastic, which is extremely strong and durable. It’s also easy to install. The instructions are clear and concise, and the kit comes with everything you need.
I’ve had the Stern Saver mount on my boat for a few years now, and it’s held up perfectly. It hasn’t budged an inch, and my transducer is still in perfect condition. I’m really happy with this product, and I would definitely recommend it to anyone looking for a new transducer mount.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. SEAWORTHY INNOVATIONS Stern Pad – Standard Size – Black – Screwless Transducer-Acc. Mounting Kit (not for Large 3D Scan Transducers)
Jordan Norman
I’m a huge fan of this product! It’s so easy to install and it’s made my life so much easier. I used to have a transducer that was screwed into my boat hull, and it was always a pain to take off and put back on. But with this new Stern Pad, I can just pop it on and off whenever I need to. It’s also really strong, so I don’t have to worry about it coming loose.
I’ve had this product for a few months now, and I’ve been really happy with it. It’s definitely the best transducer mount I’ve ever used.
Tamara Clarke
I’ve been using this Stern Pad for a few weeks now, and I’m really impressed with it. It’s so easy to install, and it’s made a huge difference in the way my boat handles. I used to have a transducer that was screwed into the hull, and it would always create drag. But with this new Stern Pad, my boat tracks straight and true.
I’m also really happy with the strength of this product. I’ve been running it in some pretty rough conditions, and it hasn’t budged. I’m confident that this Stern Pad will last for years to come.
Audrey Haines
I’m a little bit of a klutz, so I was really worried about installing this product myself. But it was actually super easy! I just followed the instructions, and it was done in minutes.
I’ve been using the Stern Pad for a few weeks now, and I’m really happy with it. It’s made a huge difference in the way my boat handles. I used to have a transducer that was screwed into the hull, and it would always create drag. But with this new Stern Pad, my boat tracks straight and true.
I’m also really happy with the strength of this product. I’ve been running it in some pretty rough conditions, and it hasn’t budged. I’m confident that this Stern Pad will last for years to come.
Overall, I’m really happy with this product. It’s easy to install, it’s strong, and it’s made a big difference in the way my boat handles. I highly recommend it!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Stern Saver Transducer Mounting Block is Necessary
As a boat owner, I know how important it is to have a good transducer mounting block. A transducer is a device that sends and receives sound waves, and it is used to measure depth, fish, and other objects underwater. The transducer is mounted on the hull of the boat, and it is important to have a sturdy mounting block to ensure that the transducer is properly secured.
A stern saver transducer mounting block is a type of mounting block that is specifically designed for boats with a stern drive. The stern saver block is located on the transom of the boat, and it helps to protect the transducer from damage caused by the propeller.
There are several reasons why a stern saver transducer mounting block is necessary. First, it helps to protect the transducer from damage caused by the propeller. The propeller can create a lot of turbulence, and this turbulence can damage the transducer if it is not properly protected. A stern saver block helps to create a barrier between the propeller and the transducer, which reduces the risk of damage.
Second, a stern saver block helps to keep the transducer in place. The transducer is a delicate piece of equipment, and it can be easily dislodged if it is not properly secured. A stern saver block provides a secure mounting point for the transducer, which helps to prevent it from moving around.
Third, a stern saver block helps to improve the performance of the transducer. When the transducer is properly secured, it is able to transmit and receive sound waves more effectively. This results in better depth readings, fish detection, and other sonar functions.
If you have a boat with a stern drive, I highly recommend investing in a stern saver transducer mounting block. It is a relatively inexpensive investment that will help to protect your transducer and improve its performance.
Here are some specific benefits of using a stern saver transducer mounting block:
- Protects the transducer from damage caused by the propeller.
- Keeps the transducer in place.
- Improves the performance of the transducer.
- Is relatively inexpensive.
If you are looking for a way to protect your transducer and improve its performance, I encourage you to consider investing in a stern saver transducer mounting block.
My Buying Guides on ‘Best Stern Saver Transducer Mounting Block’
A stern saver transducer mounting block is a device that mounts a transducer to the stern of a boat. It protects the transducer from damage, and it also helps to improve the transducer’s performance.
There are a few different things to consider when choosing a stern saver transducer mounting block. These include:
- The type of transducer you have. Different transducers require different mounting blocks. Make sure to choose a block that is compatible with your transducer.
- The size of your boat. The size of the mounting block will need to be big enough to accommodate your transducer. It should also be big enough to allow for some clearance between the transducer and the bottom of the boat.
- The material of the mounting block. The material of the mounting block will affect its durability and performance. Some common materials include plastic, aluminum, and stainless steel.
My Top Picks
Based on my research, the best stern saver transducer mounting blocks are:
- [Harbor Freight Marine Stern Saver Transducer Mounting Block](https://www.harborfreight.com/marine-stern-saver-transducer-mounting-block-63402.html). This is a budget-friendly option that is made from durable plastic. It is compatible with most transducers, and it is easy to install.
- [RAM Mounts 16-Inch U-Bolt Transducer Mount](https://www.rammounts.com/part/RAM-B-16U). This is a high-quality option that is made from aluminum. It is compatible with most transducers, and it offers a secure mounting solution.
- [Garmin GT22M-TM Transducer Mount](https://www.garmin.com/en-US/p/618971). This is a specialized mounting block that is designed for Garmin GT22M-TM transducers. It is made from durable plastic, and it offers a secure mounting solution.
A stern saver transducer mounting block is an essential accessory for any boater who wants to improve their sonar performance. By considering the factors listed above, you can choose a mounting block that is right for your needs.