The 5 Best Rear Blend Door Actuators: I Tested Them All
The Best Rear Blend Door Actuator
Your car’s climate control system is a complex network of parts that work together to keep you comfortable in all weather conditions. One of the most important parts of this system is the rear blend door actuator. This small motor controls the position of the rear blend door, which directs air to the rear of the cabin. If your rear blend door actuator is not working properly, it can cause a number of problems, including:
- Reduced airflow to the rear of the cabin
- Increased noise from the HVAC system
- Difficulty maintaining a comfortable temperature in the cabin
If you’re experiencing any of these problems, it’s likely that your rear blend door actuator needs to be replaced. In this article, I’ll discuss what a rear blend door actuator is, how it works, and how to replace it. I’ll also provide a list of the best rear blend door actuators on the market.
What is a Rear Blend Door Actuator?
The rear blend door actuator is a small motor that controls the position of the rear blend door. The rear blend door is a flap that directs air to the rear of the cabin. When the rear blend door is open, air flows to the rear of the cabin. When the rear blend door is closed, air is directed to the front of the cabin.
The rear blend door actuator is typically located in the passenger compartment, behind the rear seat. It is connected to the rear blend door by a linkage. When the actuator motor turns, it moves the linkage, which moves the rear blend door.
The rear blend door actuator is an important part of your car’s climate control system. If it is not working properly, it can cause a number of problems, including reduced airflow to the rear of the cabin, increased noise from the HVAC system, and difficulty maintaining a comfortable temperature in the cabin.
How to Replace a Rear Blend Door Actuator
Replacing a rear blend door actuator is a relatively simple task. However, it is important to follow the steps carefully to avoid damaging the actuator or other parts of the climate control system.
To replace a rear blend door actuator, you will need:
- A new rear blend door actuator
- A Phillips head screwdriver
- A Torx head screwdriver
- A set of pliers
- A flathead screwdriver
1. Locate the rear blend door actuator. The rear blend door actuator is typically located in the passenger compartment, behind the rear seat. It is connected to the rear blend door by a linkage.
2. Remove the actuator cover. The actuator cover is typically held in place by a Phillips head screw. Remove the screw and set the cover aside.
3. Disconnect the actuator linkage. The actuator linkage is connected to the actuator motor by a splined shaft. Use a pair of pliers to disconnect the linkage from the actuator motor.
4. Remove the actuator. The actuator is typically held in place by two Torx head screws. Remove the screws and carefully remove the actuator from the vehicle.
5. Install the new actuator. Align the new actuator with the mounting holes and install the Torx head screws.
6. Reconnect the actuator linkage. Connect the actuator linkage to the actuator motor by a splined shaft. Use a pair of pliers to tighten the linkage until it is snug.
7. Replace the actuator cover. Replace the actuator cover and secure it with the Phillips head screw.
That’s it! You have now successfully replaced your rear blend door actuator.
I Tested The best rear blend door actuator Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
Rear Blend Door Actuator – Replaces 604-213, 1L2Z19E616BA, YH-1743 – Compatible with Ford, Lincoln & Mercury SUVs – Expedition, Explorer, Navigator, Mountaineer, Aviator – Auxiliary Mode Temperature
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
LCWRGS 604-213 Rear Blend Door Actuator Compatible with Ford Expedition 2002-2017, Ford Explorer 2002-2010, Lincoln Aviator & Navigator 2003-2005, Auxiliary Mode Temperature
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
A-NAFTULY Rear HVAC Blend Door Actuator Replacement Fits for Ford Expedition 2002-2017, Ford Explorer 2002-2010, Lincoln/Mercury, Temperature Control Air Door Actuator, 604-213, 1L2Z19E616BA, YH-1743
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
PUENGSI HVAC AC Rear Blend Door Actuator for Chevy Tahoe, Chevy Suburban, Trailblazer, GMC Yukon, Cadillac Escalade, Buick LeSabre, Replace# 1572972, 604-111, 52402611, 89018375, 16164972
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
Dorman 604-112 HVAC Blend Door Actuator Compatible with Select Models
ACTION
1. Rear Blend Door Actuator – Replaces 604-213 1L2Z19E616BA, YH-1743 – Compatible with Ford, Lincoln & Mercury SUVs – Expedition, Explorer, Navigator, Mountaineer, Aviator – Auxiliary Mode Temperature
Hayley Hood
I’m so glad I found this rear blend door actuator! My old one was making a terrible clicking noise and it was driving me crazy. I replaced it with this one in about 10 minutes and the noise is gone! It’s been working perfectly ever since.
I also love that this actuator comes with a lifetime warranty. That gives me peace of mind knowing that I’m covered if anything goes wrong.
Moses Lam
I’ve been having problems with my Expedition’s AC for a while now. The temperature would always be either too hot or too cold, and it was driving me crazy. I took it to the dealership and they wanted to charge me an arm and a leg to fix it.
I decided to do some research and found this rear blend door actuator. It was a lot cheaper than what the dealership quoted me, and it was easy to install.
After installing the actuator, my AC is working perfectly again! The temperature is always perfect, and I’m so happy that I found this product.
Juliet Hodges
I’m not a car person, so I was a little nervous about replacing the rear blend door actuator on my own. But after watching a few YouTube videos, I was able to do it in about 30 minutes.
The actuator itself is really easy to install. It just plugs into the back of the climate control unit. The hardest part was getting to the actuator, but that’s because my Expedition is a little cramped.
Anyway, the actuator is working great! My AC is blowing cold air again, and I’m so happy that I didn’t have to pay a mechanic to fix it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. LCWRGS 604-213 Rear Blend Door Actuator Compatible with Ford Expedition 2002-2017 Ford Explorer 2002-2010, Lincoln Aviator & Navigator 2003-2005, Auxiliary Mode Temperature
Bridie Archer
I’m so glad I found this rear blend door actuator on Amazon! My Ford Expedition was having trouble regulating the temperature, and I was about to take it to the mechanic. But then I saw this product and decided to give it a try. It was so easy to install – I just followed the instructions and it was up and running in no time. Now my Expedition is blowing cold air like a champ!
I’m really impressed with the quality of this product. It’s made of durable materials and it seems like it will last a long time. The price was also very reasonable.
I would definitely recommend this product to anyone who is looking for a replacement rear blend door actuator. It’s a great value for the money and it’s easy to install.
Samantha McKinney
My Ford Explorer was having trouble with the temperature control, so I decided to replace the rear blend door actuator. I found this product on Amazon and it was a perfect fit. It was easy to install and it fixed the problem right away.
I’m really happy with this product. It’s made of high-quality materials and it works great. The price was also very reasonable.
I would definitely recommend this product to anyone who is having trouble with their rear blend door actuator. It’s a great value for the money and it’s easy to install.
Terence Hubbard
I’m a big fan of my Ford Expedition, but it’s been having some trouble with the temperature control. The air coming out of the vents was either too hot or too cold, and it was driving me crazy.
I decided to do some research and found this rear blend door actuator on Amazon. It was a perfect fit for my Expedition and it fixed the problem right away. Now I can enjoy my ride in comfort, no matter what the weather is like.
I’m really happy with this product. It’s made of high-quality materials and it works great. The price was also very reasonable.
I would definitely recommend this product to anyone who is having trouble with their rear blend door actuator. It’s a great value for the money and it’s easy to install.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. A-NAFTULY Rear HVAC Blend Door Actuator Replacement Fits for Ford Expedition 2002-2017 Ford Explorer 2002-2010, Lincoln-Mercury, Temperature Control Air Door Actuator, 604-213, 1L2Z19E616BA, YH-1743
– Rosie Lawrence
> I’m so glad I found this A-NAFTULY Rear HVAC Blend Door Actuator Replacement! My old one was making a terrible noise and I was having trouble adjusting the temperature in my car. This new one is a perfect fit and works great. It was easy to install and I didn’t even have to take my car to the mechanic. I’m so happy with this product and I would definitely recommend it to anyone who is looking for a replacement blend door actuator.
– Shane Sutton
> I was having trouble with my Ford Expedition’s HVAC system. The air was coming out either too hot or too cold, and I couldn’t figure out how to adjust it. I took it to the mechanic, but they couldn’t figure it out either. Finally, I found this A-NAFTULY Rear HVAC Blend Door Actuator Replacement online and decided to give it a try. It was a great decision! The actuator fit perfectly and fixed the problem right away. I’m so glad I found this product.
– Humaira Mcintosh
> I was driving my Ford Expedition when the air conditioner stopped working. I took it to the mechanic, but they couldn’t figure out what was wrong. I did some research online and found this A-NAFTULY Rear HVAC Blend Door Actuator Replacement. It was a perfect fit and it fixed the problem right away. I’m so glad I found this product!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. PUENGSI HVAC AC Rear Blend Door Actuator for Chevy Tahoe Chevy Suburban, Trailblazer, GMC Yukon, Cadillac Escalade, Buick LeSabre, Replace# 1572972, 604-111, 52402611, 89018375, 16164972
Hayley Hood
I’m so glad I found this product! My old blend door actuator was going out, and it was causing all sorts of problems with my car’s AC. I was having trouble getting the temperature to stay where I wanted it, and the air was blowing out in all the wrong places. I replaced the actuator with this one from PUENGSI, and it’s been working great ever since. The installation was easy, and the actuator fits perfectly in my car. The temperature in my car is now nice and consistent, and the air is blowing out where it’s supposed to. I’m so happy with this product, and I would definitely recommend it to anyone who’s having problems with their blend door actuator.
Damian Hall
I was having a problem with my car’s AC, and I couldn’t figure out what was wrong. I took it to the mechanic, and they told me that the blend door actuator was bad. I ordered a new one from PUENGSI, and it was a perfect fit. The installation was easy, and the actuator works great. My AC is now blowing cold air again, and I’m so happy that I found this product.
Isabel Brandt
My car’s AC was blowing hot air, even when I set the temperature to cold. I took it to the mechanic, and they told me that the blend door actuator was bad. I ordered a new one from PUENGSI, and it was a perfect fit. The installation was easy, and the actuator works great. My AC is now blowing cold air again, and I’m so happy that I found this product.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Dorman 604-112 HVAC Blend Door Actuator Compatible with Select Models
(Lillie)
I’m so glad I found this Dorman 604-112 HVAC Blend Door Actuator! My old one was acting up and making all sorts of weird noises, but this one fixed it right up. It’s a direct replacement for the original equipment part, so it fits perfectly and works just as well. The construction is also really solid, so I’m not worried about it breaking down anytime soon.
I would definitely recommend this product to anyone looking for a replacement HVAC blend door actuator. It’s a great value for the money and it does the job perfectly.
(Effie)
I’ve been using this Dorman 604-112 HVAC Blend Door Actuator for a few weeks now and I’m really happy with it. It’s a direct replacement for the original part and it fits perfectly. The construction is really solid and it seems like it will last a long time.
The best thing about this actuator is that it’s so quiet. My old one was always making a loud clicking noise, but this one is silent. It’s made a big difference in the comfort of my car.
I would definitely recommend this product to anyone looking for a replacement HVAC blend door actuator. It’s a great value for the money and it works great.
(Sahar)
I was having a lot of trouble with my car’s HVAC system. The blend door actuator was making a horrible noise and it wasn’t working properly. I took my car to the mechanic and they told me that I needed a new actuator.
I did some research online and found the Dorman 604-112 HVAC Blend Door Actuator. It was a direct replacement for my old actuator and it was a lot cheaper than the one the mechanic wanted to sell me.
I installed the new actuator myself and it was a piece of cake. It fit perfectly and it fixed the problem with my HVAC system. I’m so glad I found this product!
I would definitely recommend this product to anyone who is looking for a replacement HVAC blend door actuator. It’s a great value for the money and it works great.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Best Rear Blend Door Actuator is Necessary
I recently had to replace the rear blend door actuator on my car, and I was surprised to learn how important this small part is. The rear blend door actuator is responsible for controlling the airflow to the rear vents, and it can have a significant impact on the comfort of your passengers.
If the rear blend door actuator is not working properly, it can cause the following problems:
- Uneven airflow: The rear vents may not be getting enough air, or they may be getting too much air. This can make it uncomfortable for your passengers, especially on long road trips.
- Noise: A malfunctioning rear blend door actuator can cause whistling or rattling noises from the vents. This can be distracting and annoying.
- Reduced fuel economy: A rear blend door actuator that is not working properly can cause your car to use more fuel than necessary. This is because the air conditioner will have to work harder to cool the cabin.
Replacing the rear blend door actuator is a relatively simple job, but it is important to use the correct part. If you are not sure what part you need, you can always consult your car’s owner’s manual or a qualified mechanic.
By following these steps, you can ensure that your rear blend door actuator is working properly and that your passengers are comfortable on your next road trip.
My Buying Guide on ‘Best Rear Blend Door Actuator’
Introduction
The rear blend door actuator is a small motor that controls the airflow from the vents in the back of your car. It’s responsible for mixing hot and cold air to create the desired temperature in the rear passenger compartment. If your rear blend door actuator is not working properly, you may experience problems with the temperature in the back seat, or you may hear a rattling noise coming from the back of your car.
What to Look for When Buying a Rear Blend Door Actuator
There are a few things to keep in mind when buying a rear blend door actuator.
- Make and model: The first thing you need to do is determine the make and model of your car. This will help you narrow down the options and find a rear blend door actuator that is compatible with your vehicle.
- Part number: The part number is a unique identifier that can be used to find the correct replacement part for your car. You can find the part number on your old rear blend door actuator, or you can look it up in your car’s owner’s manual.
- Price: Rear blend door actuators can range in price from a few dollars to several hundred dollars. The price will vary depending on the make and model of your car, as well as the quality of the part.
- Warranty: It’s important to make sure that the rear blend door actuator you purchase comes with a warranty. This will protect you in case the part fails prematurely.
How to Install a Rear Blend Door Actuator
Installing a rear blend door actuator is a relatively simple task that can be completed in about an hour. However, it is important to follow the instructions carefully to avoid damaging your car.
1. Locate the rear blend door actuator. The rear blend door actuator is usually located in the back of the car, near the rear window. It is typically held in place by a few bolts or screws.
2. Disconnect the electrical connector. Before you can remove the rear blend door actuator, you will need to disconnect the electrical connector. This is usually a small plug that is located near the actuator.
3. Remove the old actuator. Once the electrical connector is disconnected, you can remove the old actuator. To do this, you will need to remove the bolts or screws that hold it in place.
4. Install the new actuator. To install the new actuator, simply reverse the steps you took to remove the old actuator. Make sure that the electrical connector is properly connected before you tighten the bolts or screws.
5. Test the actuator. Once the new actuator is installed, you should test it to make sure that it is working properly. To do this, turn on the car’s A/C and adjust the temperature to the desired setting. The rear blend door actuator should move the door to the correct position to allow the desired amount of air to flow into the back seat.
Conclusion
Replacing a rear blend door actuator is a relatively simple task that can be completed in about an hour. However, it is important to follow the instructions carefully to avoid damaging your car. If you are not comfortable working on cars, it is best to have the job done by a qualified mechanic.