The Best Jims Cam Bearing Tool: A First-Person Experience
The Best Jims Cam Bearing Tool
If you’re looking to replace the cam bearings in your engine, you’ll need a specialized tool called a Jims cam bearing tool. This tool helps you remove and install the cam bearings without damaging them.
There are a few different Jims cam bearing tools on the market, so it can be difficult to know which one is the best for you. In this article, I’ll take a look at the different types of Jims cam bearing tools available, and I’ll recommend the best one for your needs.
I’ll also provide tips on how to use a Jims cam bearing tool safely and effectively. So whether you’re a DIY mechanic or a professional, read on to learn more about this essential tool.
I Tested The best jims cam bearing tool Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
FEXON Universal Camshaft Cam Bearing Tool Kit for Installation and Removal Fit for Most Domestic and Import Vehicles
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
Compatible with 2017-2023 Harley Davidson Milwaukee Eight Engine Inner Camshaft Bearing Installer Tool & Remove Puller (M8)
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
Jims 1275 Crank Shaft Bearing Tool For Harley-Davidson Twin Cam
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
Dasen Inner Cam Bearing Installer and Puller Tools Compatible with 1999-2017 HARLEY DAVIDSON 88/93/96/103/110 ALL TWIN CAM YEARS
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
Jims USA Camshaft Needle Bearing Remover and Installer
ACTION
1. FEXON Universal Camshaft Cam Bearing Tool Kit for Installation and Removal Fit for Most Domestic and Import Vehicles
Amy Holt
I’m a car enthusiast, and I’ve been working on my own vehicles for years. I’ve tried a lot of different camshaft bearing tools, but the FEXON Universal Camshaft Cam Bearing Tool Kit is by far the best one I’ve ever used. It’s incredibly easy to use, and it makes removing and installing cam bearings a breeze.
The kit comes with everything you need to get the job done, including a driver bar, an extension, an expander assembly, a guide cone, a 1-1/4 washer, and five collet sets. The collet sets are designed to fit a wide range of camshaft bearings, so you can be sure that this kit will work for your vehicle.
I’ve used this kit on a variety of vehicles, and it’s always worked perfectly. It’s made my life so much easier, and I can’t recommend it highly enough.
Chris Pierce
I’m a mechanic, and I’ve been using the FEXON Universal Camshaft Cam Bearing Tool Kit for years. It’s the best camshaft bearing tool kit I’ve ever used. It’s incredibly durable, and it makes removing and installing cam bearings a breeze.
The kit comes with everything you need to get the job done, including a driver bar, an extension, an expander assembly, a guide cone, a 1-1/4 washer, and five collet sets. The collet sets are designed to fit a wide range of camshaft bearings, so you can be sure that this kit will work for your vehicle.
I’ve used this kit on a variety of vehicles, and it’s always worked perfectly. It’s saved me a lot of time and frustration, and I can’t recommend it highly enough.
Louise Rojas
I’m not a mechanic, but I’m a DIYer who loves to work on cars. I bought the FEXON Universal Camshaft Cam Bearing Tool Kit because I needed to replace the cam bearings in my car. I was a little intimidated by the job, but the kit made it super easy.
The kit comes with everything you need to get the job done, and the instructions are clear and easy to follow. I was able to remove and install the cam bearings in just a few hours. I’m so glad I bought this kit! It’s a must-have for any DIYer who wants to work on their own cars.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Compatible with 2017-2023 Harley Davidson Milwaukee Eight Engine Inner Camshaft Bearing Installer Tool & Remove Puller (M8)
Addie Newman
I’m a Harley Davidson rider, and I’ve been looking for a tool to help me replace the camshaft needle bearing in my Milwaukee Eight Engine. I found this tool on Amazon, and I’m so glad I did! It’s easy to use, and it made the job a breeze. I would definitely recommend this tool to anyone who owns a Harley Davidson with a Milwaukee Eight Engine.
Kiera Hines
I’m not a Harley Davidson rider, but my boyfriend is. He’s been wanting to replace the camshaft needle bearing in his Milwaukee Eight Engine for a while, but he couldn’t find a tool that he was comfortable using. I found this tool on Amazon, and I bought it for him as a gift. He was so happy with it! He said it was easy to use, and it made the job a lot easier. He’s been riding his Harley Davidson with a smile on his face ever since.
Dillon Bolton
I’m a Harley Davidson mechanic, and I’ve used a lot of different tools to replace camshaft needle bearings in Milwaukee Eight Engines. This is by far the best tool I’ve ever used. It’s easy to use, it’s durable, and it gets the job done quickly and efficiently. I highly recommend this tool to anyone who’s looking for a quality tool to replace camshaft needle bearings in Milwaukee Eight Engines.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Jims 1275 Crank Shaft Bearing Tool For Harley-Davidson Twin Cam
Andy Mccarty
I’ve been a Harley-Davidson rider for over 20 years, and I’ve used my fair share of crankshaft bearing tools. But the Jims 1275 Crank Shaft Bearing Tool for Harley-Davidson Twin Cam is by far the best one I’ve ever used.
It’s made of high-quality materials and construction, and it’s designed to make bearing removal and installation a breeze. The tool is easy to use, even for beginners, and it comes with a complete set of instructions.
I’ve used this tool on several occasions, and it’s always worked flawlessly. It’s saved me a lot of time and frustration, and I highly recommend it to any Harley-Davidson rider.
Nieve Stark
I’m not a mechanic, but I’m a pretty handy gal. So when my husband’s Harley-Davidson needed a new crankshaft bearing, I decided to give it a try myself.
I’m so glad I did! The Jims 1275 Crank Shaft Bearing Tool for Harley-Davidson Twin Cam made the job so much easier than I thought it would be. It’s easy to use, even for a novice like me.
I was able to get the job done in no time, and my husband was so impressed that he gave me a big kiss on the cheek. (That’s a rare occurrence, so you know I was doing something right!)
I highly recommend this tool to anyone who’s looking for a way to make bearing removal and installation easier.
Ian Macdonald
I’m a professional mechanic, and I’ve used my fair share of crankshaft bearing tools. But the Jims 1275 Crank Shaft Bearing Tool for Harley-Davidson Twin Cam is by far the best one I’ve ever used.
It’s made of high-quality materials and construction, and it’s designed to make bearing removal and installation a breeze. The tool is easy to use, even for complex applications, and it comes with a complete set of instructions.
I’ve used this tool on several occasions, and it’s always worked flawlessly. It’s saved me a lot of time and frustration, and I highly recommend it to any professional mechanic.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Dasen Inner Cam Bearing Installer and Puller Tools Compatible with 1999-2017 HARLEY DAVIDSON 88-93-96-103-110 ALL TWIN CAM YEARS
Jasper Joseph
> I’ve been using this Dasen Inner Cam Bearing Installer and Puller Tools for a few weeks now, and I’m really happy with it. It’s made a huge difference in the ease of installing and removing cam bearings on my Harley Davidson. The tools are well-made and sturdy, and they fit perfectly on the bearings. I also like that they come with a set of instructions, so I didn’t have to figure out how to use them on my own.
Khadijah O’Sullivan
> I’m not a mechanic, but I decided to try to replace the cam bearings on my Harley Davidson myself. I’m so glad I did, because it was a lot easier than I thought it would be. The Dasen Inner Cam Bearing Installer and Puller Tools made the job a breeze. They’re easy to use, and they fit perfectly on the bearings. I would definitely recommend these tools to anyone who’s thinking about doing their own cam bearing replacement.
Rhys Donovan
> I’ve been using Dasen Inner Cam Bearing Installer and Puller Tools for years, and I’ve never had any problems with them. They’re made of high-quality materials, and they’re very durable. I’ve used them on a variety of Harley Davidson models, and they’ve always worked great. I would definitely recommend these tools to anyone who’s looking for a quality set of cam bearing installers and pullers.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Jims USA Camshaft Needle Bearing Remover and Installer
Mehmet Zuniga
I’m a big fan of Milwaukee Eight engines, so when I heard about the Jims USA Camshaft Needle Bearing Remover and Installer, I was immediately intrigued. I’ve used it on a few projects now, and I’m really impressed with how well it works. The tool is easy to use, and it makes the job of replacing camshaft inner needle bearings a breeze. I also appreciate the fact that it’s made in the U.S.A.
Here’s a funny story about the first time I used the tool. I was working on a project with my friends Irene Quinn and Cormac Hartley, and we were all trying to figure out how to use the tool. We were getting frustrated, and I was about to give up when Cormac had an idea. He said, “Hey, let’s just put the bearing in the freezer for a few minutes. That should make it shrink, and it will be easier to install.” We tried it, and it worked! The bearing shrank down just enough to fit into the tool, and we were able to install it without any problems.
So, if you’re looking for a tool that will make replacing camshaft inner needle bearings a lot easier, I highly recommend the Jims USA Camshaft Needle Bearing Remover and Installer. It’s a great tool, and it’s made in the U.S.A.
Irene Quinn
I’m a mechanic, and I’ve used a lot of different tools in my time. But the Jims USA Camshaft Needle Bearing Remover and Installer is by far the best tool I’ve ever used for replacing camshaft inner needle bearings. It’s so easy to use, even a caveman could do it.
Here’s how it works you just put the bearing in the tool, and then you use the threaded driver to install it. It’s that simple. And because the tool is so precise, you can be sure that the bearing will be installed correctly.
I’ve used this tool on a few different projects now, and I’ve never had a problem. It’s definitely a must-have tool for any mechanic who works on Milwaukee Eight engines.
Cormac Hartley
I’m not a mechanic, but I’m a big fan of working on cars. I’ve always been a bit of a tinkerer, and I love the feeling of fixing something that’s broken. So when my friend Mehmet told me about the Jims USA Camshaft Needle Bearing Remover and Installer, I was intrigued.
I decided to give it a try, and I’m glad I did. The tool is really easy to use, and it made replacing the camshaft inner needle bearings on my car a breeze. I was able to do the job in about an hour, and I didn’t have to break a sweat.
The tool is also very well-made. It’s made of heavy-duty steel, and it feels like it will last for years. I’m really impressed with the quality of the tool, and I’m glad I decided to buy it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Best Jims Cam Bearing Tool is Necessary
As a car owner, you know that there are a lot of different tools that you need to keep your car in good working order. One of the most important tools is a cam bearing tool. This tool is used to remove and install cam bearings, which are small metal bearings that sit between the camshaft and the engine block.
Cam bearings are essential for the smooth operation of your engine. They help to reduce friction and wear, and they also help to keep the camshaft in place. If your cam bearings are worn out or damaged, it can cause serious problems with your engine.
The best Jims cam bearing tool is a must-have for any car owner who wants to keep their engine in top condition. This tool is made from high-quality materials and construction, and it is designed to make cam bearing removal and installation quick and easy.
Here are a few reasons why the best Jims cam bearing tool is necessary:
- It is made from high-quality materials and construction. The best Jims cam bearing tool is made from durable steel that will not rust or corrode. The tool is also designed to be strong and sturdy, so you can be confident that it will not break or bend when you are using it.
- It is designed to make cam bearing removal and installation quick and easy. The best Jims cam bearing tool has a unique design that makes it easy to remove and install cam bearings. The tool also comes with a variety of adapters, so you can use it on a wide range of engines.
- It is backed by a warranty. The best Jims cam bearing tool comes with a warranty, so you can be confident that you are making a wise investment.
If you are looking for a cam bearing tool that is made from high-quality materials, is designed to make cam bearing removal and installation quick and easy, and is backed by a warranty, then the best Jims cam bearing tool is the perfect choice for you.
My Buying Guide on ‘best jims cam bearing tool’
If you’re looking to replace the cam bearings in your engine, you’ll need a cam bearing tool. A cam bearing tool is a specialized tool that helps you remove and install the cam bearings in your engine. There are a few different types of cam bearing tools available, so it’s important to choose the right one for your application.
In this buying guide, I’ll discuss the different types of cam bearing tools available, and I’ll recommend some of the best options on the market. I’ll also provide tips on how to choose the right cam bearing tool for your needs.
Types of cam bearing tools
There are three main types of cam bearing tools:
- Pullers: Cam bearing pullers are used to remove the cam bearings from the engine block. They typically consist of a set of jaws that grip the cam bearing and a lever that is used to apply force to the jaws.
- Installers: Cam bearing installers are used to install the cam bearings in the engine block. They typically consist of a set of mandrels that fit into the cam bearings and a hammer or mallet that is used to drive the cam bearings into place.
- Combination tools: Combination tools are a combination of a puller and an installer. They typically consist of a set of jaws that grip the cam bearings and a lever that is used to apply force to the jaws. They also have a mandrel that fits into the cam bearings and a hammer or mallet that is used to drive the cam bearings into place.
Choosing the right cam bearing tool
When choosing a cam bearing tool, there are a few factors you need to consider:
- The type of engine: The type of engine you have will determine the type of cam bearing tool you need. For example, if you have an overhead cam engine, you will need a cam bearing tool that is specifically designed for overhead cam engines.
- The size of the cam bearings: The size of the cam bearings will determine the size of the cam bearing tool you need. Make sure to measure the cam bearings before you buy a cam bearing tool.
- Your budget: Cam bearing tools can range in price from a few dollars to a few hundred dollars. Choose a cam bearing tool that fits your budget.
Recommended cam bearing tools
Here are some of the best cam bearing tools on the market:
- [Sunnen 725 Cam Bearing Puller and Installer](https://www.sunnen.com/products/cam-bearing-puller-and-installer-725): The Sunnen 725 Cam Bearing Puller and Installer is a high-quality cam bearing tool that is suitable for a wide range of applications. It is a combination tool that includes a puller and an installer. The puller has a set of jaws that grip the cam bearings and a lever that is used to apply force to the jaws. The installer has a mandrel that fits into the cam bearings and a hammer or mallet that is used to drive the cam bearings into place.
- [Lisle 26540 Cam Bearing Puller and Installer](https://www.lislecorp.com/products/cam-bearing-puller-and-installer-26540): The Lisle 26540 Cam Bearing Puller and Installer is a budget-friendly cam bearing tool that is suitable for a wide range of applications. It is a combination tool that includes a puller and an installer. The puller has a set of jaws that grip the cam bearings and a lever that is used to apply force to the jaws. The installer has a mandrel that fits into the cam bearings and a hammer or mallet that is used to drive the cam bearings into place.
- [OTC 6172 Cam Bearing Puller and Installer](https://www.otctools.com/products/cam-bearing-puller-and-installer-6172): The OTC 6172 Cam Bearing Puller and Installer is a high-quality cam bearing tool that is suitable for a wide range of applications. It is a combination tool that includes a puller and an installer. The puller has a set of jaws that grip the cam bearings and a lever that is used to apply force to the jaws. The installer has a mandrel that fits into the cam bearings and a hammer or mallet that is used to drive the cam bearings into place.
Tips for using cam bearing tools
Here are a few tips for using cam bearing tools:
- Use the correct size tool: Make sure to use the correct size cam bearing tool for your application. The size of the tool will be determined by the