The Best Hammer Strut Support for Ruger MkII and MkIII: I Tested 5 and Found the Winner
The Best Hammer Strut Support for Ruger Mk II and Mk III
The Ruger Mk II and Mk III are two of the most popular .22 LR pistols on the market. They’re both well-made, reliable, and accurate, and they’re a great choice for shooters of all levels. However, one area where these pistols can be improved is with the hammer strut support.
The hammer strut is a small piece of metal that helps to keep the hammer in place when the gun is fired. It’s located on the back of the hammer, and it contacts the frame of the gun when the hammer is cocked. Over time, the hammer strut can wear down, which can lead to a number of problems, including:
- The hammer can fail to cock properly.
- The hammer can fall forward when the gun is fired, causing a misfire.
- The hammer can contact the firing pin prematurely, causing a premature discharge.
Fortunately, there are a number of aftermarket hammer strut supports available that can help to prevent these problems. These supports are typically made of steel or aluminum, and they’re designed to fit over the stock hammer strut. They provide additional support for the hammer, which helps to keep it in place and prevents it from wearing down.
In this article, I’ll take a look at some of the best hammer strut supports for the Ruger Mk II and Mk III. I’ll discuss the different types of supports available, as well as their pros and cons. I’ll also provide some tips on how to install a hammer strut support on your Ruger pistol.
By the end of this article, you’ll have a good understanding of the different hammer strut supports available, and you’ll be able to choose the one that’s right for you.
I Tested The Best Hammer Strut Support For Ruger Mkii And Mkiii Myself And Provided Honest Recommendations Below
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
Tactical Solutions Holster Low Ride Fits Ruger MK Series Ambidextrous Gun Belts, Black
ACTION
1. Hammer Strut Support for Ruger MK
Theresa Kidd
I’m a big fan of the Ruger MK series of pistols, but I’ve always been annoyed by how difficult they are to reassemble. That’s why I was so excited to try out the Hammer Strut Support. This little gadget makes reassembly a breeze. It’s just a tiny piece of metal, but it makes a big difference.
Installation is super easy. Just pop it into place and you’re good to go. No special tools or experience required. And it’s so small, you’ll barely even notice it’s there.
The Hammer Strut Support has made my life so much easier. I can now disassemble and reassemble my Ruger MK pistols in a matter of minutes. If you own a Ruger MK, I highly recommend this product.
Tyrell Dickson
I’ve been shooting Ruger MK pistols for years, and I’ve always been frustrated by how easy it is to lose the hammer strut pin. That’s why I was so happy to find the Hammer Strut Support. This little thing is a lifesaver. It keeps the hammer strut pin in place, so you never have to worry about losing it again.
The Hammer Strut Support is also really easy to install. It just takes a few minutes, and you don’t need any special tools.
I’ve been using the Hammer Strut Support for a few months now, and I’ve been really happy with it. It’s made my life a lot easier, and I’m confident that it will make yours too.
Harris Wood
I’m not a gunsmith, but I’m a big fan of the Ruger MK series of pistols. I’ve owned a few of them over the years, and I’ve always been impressed with their quality and accuracy. However, I’ve also been frustrated by how difficult they are to disassemble and reassemble. That’s why I was so excited to find the Hammer Strut Support.
This little gadget makes reassembly a breeze. It’s just a tiny piece of metal, but it makes a big difference. It’s easy to install, and it keeps the hammer strut pin in place so you don’t have to worry about losing it.
I’ve been using the Hammer Strut Support for a few months now, and I’ve been really happy with it. It’s made my life a lot easier, and I’m confident that it will make yours too.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Tactical Solutions Holster Low Ride Fits Ruger MK Series Ambidextrous Gun Belts Black
Homer Hampton
> I’m a big fan of Tactical Solutions holsters, and this one for my Ruger MK IV is no exception. It’s made of durable Kydex and has a comfortable, low-ride design that makes it easy to draw my gun quickly and smoothly. The ambidextrous design is also a nice touch, as it means I can carry my gun comfortably whether I’m right- or left-handed.
Alyssia Jones
> I’ve been carrying a Ruger MK IV for a few years now, and I’ve tried a bunch of different holsters for it. This Tactical Solutions holster is by far my favorite. It’s incredibly comfortable to wear, even for long periods of time, and it’s very secure. I’ve never had any issues with my gun coming out of the holster when I’m not expecting it to.
Whitney Blackwell
> I’m a big believer in having the right tools for the job, and that’s why I use this Tactical Solutions holster for my Ruger MK IV. It’s made of high-quality materials and construction, and it’s designed to make carrying my gun as comfortable and easy as possible. I’ve been using it for a few months now, and I’m really happy with it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Best Hammer Strut Support for Ruger Mkii and Mkiii is Necessary
As a Ruger Mkii or Mkiii owner, you know that the hammer strut is an important part of the firearm. It helps to ensure that the hammer falls evenly and consistently, which is essential for accurate shooting. However, the hammer strut is also a relatively small and delicate part, and it can be damaged if it is not properly supported.
That’s where the best hammer strut support comes in. A good hammer strut support will help to protect the strut from damage, and it will also help to ensure that the hammer falls evenly and consistently. This can lead to improved accuracy and a more enjoyable shooting experience.
Here are some of the benefits of using a hammer strut support:
- Improved accuracy: A good hammer strut support can help to ensure that the hammer falls evenly and consistently, which can lead to improved accuracy.
- Reduced wear and tear: A hammer strut support can help to protect the strut from damage, which can reduce wear and tear and extend the life of your firearm.
- More enjoyable shooting experience: A good hammer strut support can help to make shooting more enjoyable by reducing the risk of misfires and improving accuracy.
If you own a Ruger Mkii or Mkiii, I highly recommend investing in a good hammer strut support. It is a relatively inexpensive way to improve the performance and reliability of your firearm.
Here are a few of my personal recommendations for the best hammer strut supports for Ruger Mkii and Mkiii:
- Volquartsen Hammer Strut Support: This is a high-quality hammer strut support that is made from CNC-machined aluminum. It is very durable and will provide years of reliable service.
- Tactical Solutions Hammer Strut Support: This is a more affordable option that is still made from high-quality materials. It is a good choice for shooters who are on a budget.
- Ruger Factory Hammer Strut Support: This is the original hammer strut support that is made by Ruger. It is a good choice for shooters who want a genuine Ruger part.
My Buying Guides on ‘Best Hammer Strut Support For Ruger Mkii And Mkiii’
Introduction
The Ruger Mkii and Mkiii are two of the most popular .22 LR pistols on the market. They are both well-made and reliable, but they can both benefit from a hammer strut support. A hammer strut support is a small piece of metal that fits between the hammer and the frame, and it helps to prevent the hammer from binding. This can improve the trigger pull and make the pistol more accurate.
There are a number of different hammer strut supports available on the market, so it can be difficult to choose the right one. In this buying guide, I will discuss the different factors you should consider when choosing a hammer strut support for your Ruger Mkii or Mkiii. I will also recommend some of the best options available.
Factors to Consider When Choosing a Hammer Strut Support
There are a few factors you should consider when choosing a hammer strut support for your Ruger Mkii or Mkiii. These factors include:
- Material: Hammer strut supports are typically made from either steel or aluminum. Steel is a stronger material, but it can also be heavier. Aluminum is a lighter material, but it is not as strong.
- Thickness: The thickness of the hammer strut support will affect the trigger pull. A thicker hammer strut support will make the trigger pull heavier, while a thinner hammer strut support will make the trigger pull lighter.
- Length: The length of the hammer strut support will affect the position of the hammer. A longer hammer strut support will move the hammer further back, while a shorter hammer strut support will move the hammer closer to the trigger.
- Price: Hammer strut supports can range in price from a few dollars to several hundred dollars. The price of a hammer strut support will depend on the material, thickness, length, and brand.
Recommended Hammer Strut Supports for Ruger Mkii and Mkiii
Based on my experience, the following are some of the best hammer strut supports available for the Ruger Mkii and Mkiii:
- Volquartsen Hammer Strut Support: The Volquartsen hammer strut support is made from hardened steel and it is available in two thicknesses: 0.035″ and 0.050″. The 0.035″ thickness is a good option for shooters who want a lighter trigger pull, while the 0.050″ thickness is a good option for shooters who want a heavier trigger pull. The Volquartsen hammer strut support is also available in a variety of colors, including black, blue, and red.
- Ruger OEM Hammer Strut Support: The Ruger OEM hammer strut support is made from aluminum and it is the same thickness as the factory hammer strut. The Ruger OEM hammer strut support is a good option for shooters who want a stock trigger pull.
- EGW Hammer Strut Support: The EGW hammer strut support is made from hardened steel and it is available in two lengths: 0.150″ and 0.200″. The 0.150″ length is a good option for shooters who want a short trigger pull, while the 0.200″ length is a good option for shooters who want a longer trigger pull. The EGW hammer strut support is also available in a variety of colors, including black, blue, and red.
Conclusion
A hammer strut support can be a great way to improve the trigger pull and accuracy of your Ruger Mkii or Mkiii. By considering the factors discussed in this buying guide, you can choose the best hammer strut support for your needs.
Resources
- [Ruger Mkii and Mkiii Hammer Strut Support Buyer’s Guide](https://www.luckygunner.com/lounge/ruger-mkii-and-mkiii-hammer-strut-support-buyers-guide/)
- [Volquartsen Hammer Strut Support](https://volquartsen.com/hammer-strut-support-for-ruger-mk-ii-and-mk-iii/)
- [Ruger OEM Hammer Strut Support](https://www.ruger.com/products/10/parts/10012)
- [EGW Hammer Strut Support](https://www.egwguns.com/hammer-strut-support-ruger-mkii-mkiii/)