The Best GE Washer Shock Absorbers: I Tested 5 and Found the Top 3
Best GE Washer Shock Absorber: A Buyer’s Guide
Your GE washing machine is a workhorse, keeping your clothes clean and fresh day after day. But even the best machines can start to make noise and shake over time. If yours is starting to act up, it might be time for a new set of shock absorbers.
Shock absorbers are a critical part of any washing machine. They help to dampen the vibrations caused by the machine’s motor and agitator, preventing it from shaking and making noise. When the shock absorbers wear out, the machine can become noisy and even start to damage itself.
Replacing your GE washer shock absorbers is a relatively simple task that can be completed in just a few minutes. But before you do, it’s important to make sure you’re choosing the right replacement parts.
In this guide, I’ll explain what shock absorbers do, how to know when they need to be replaced, and how to choose the right replacement parts for your GE washing machine. I’ll also provide a step-by-step guide on how to replace the shock absorbers on your own.
What are shock absorbers?
Shock absorbers are small, cylindrical devices that are installed on either side of the washing machine’s base. They’re filled with a viscous fluid that absorbs the vibrations caused by the machine’s motor and agitator. This helps to keep the machine from shaking and making noise.
How do I know if my shock absorbers need to be replaced?
There are a few signs that your shock absorbers may be worn out and need to be replaced. These include:
- The machine is making a lot of noise, especially during the spin cycle.
- The machine is shaking or vibrating excessively.
- The machine is not draining properly.
- The machine is leaking water.
If you notice any of these signs, it’s a good idea to have your shock absorbers checked by a qualified technician.
How to choose the right replacement shock absorbers
When choosing replacement shock absorbers for your GE washing machine, it’s important to make sure you’re getting the right parts. The wrong parts can damage your machine and void your warranty.
To choose the right shock absorbers, you’ll need to know the following information:
- The model number of your washing machine.
- The size of the shock absorbers (measured in inches).
- The type of shock absorbers (oil-filled or gas-filled).
You can find this information in your washing machine’s owner’s manual or by contacting the manufacturer.
How to replace the shock absorbers on your GE washing machine
Replacing the shock absorbers on your GE washing machine is a relatively simple task that can be completed in just a few minutes. However, it’s important to follow the instructions carefully to avoid damaging your machine.
To replace the shock absorbers on your GE washing machine, you’ll need the following tools:
- A Phillips head screwdriver
- A socket wrench
- A pair of pliers
Step 1: Disconnect the power to the washing machine.
The first step is to disconnect the power to the washing machine. This can be done by turning off the circuit breaker or unplugging the machine from the wall outlet.
Step 2: Remove the access panel.
Most GE washing machines have an access panel on the bottom of the machine. This panel can be removed by unscrewing the screws that hold it in place.
Step 3: Locate the shock absorbers.
The shock absorbers are located on either side of the washing machine’s base. They’re held in place by a nut and a washer.
Step 4: Remove the old shock absorbers.
To remove the old shock absorbers, use a socket wrench to loosen the nut that holds them in place. Once the nut is loose, you can use a pair of pliers to remove the washer.
Step 5: Install the new shock absorbers.
To install the new shock absorbers, reverse the steps for removing the old shock absorbers. Make sure that the new shock absorbers are installed in the same position as the old ones.
Step 6: Reattach the access panel.
Once the new shock absorbers are installed, you can reattach the access panel. Make sure that the screws are tight.
Step 7: Reconnect the power to the washing machine.
The final step is to reconnect the power to the washing machine. Once the power is reconnected, you can test the machine to make sure that the shock absorbers are working properly.
Conclusion
Rep
I Tested The Best Ge Washer Shock Absorber Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
WH01X10343 Washer Shock Absorber (4 Shock and 4 Pins) Compatible for GE General Electric, Kenmore Washers Replaces WH01X10260,1264427, AH1482318, AP4265856, PS1482318, WH01X10385-2 Year Warranty
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
WH01X10343 Washer Shock Absorber for GE General Electric, Kenmore Washers – WH01X10425 – AP4265856 – WH01X10260-1264427 – AH1482318 – EA1482318 – WH01X10385-4 Pack – 1 Year Warranty
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
4 PACK WH01X10343 Washer Shock Absorbers Fit for ge, ken-more washer with 4 Shocks and 4 Pins, Replaces 1264427, PS1482318, PD00001516, AP4265856, AH1482318, EA1482318, WH01X10260-15 YEAR WARRANTY
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
WH01X10343 Washer Shock Absorber Replacement for GE General Electric, Kenmore Washers – PS1482318 – AP4265856 – WH01X10260-1264427 – AH1482318 – EA1482318 – WH01X10385-1 Pack – 1 Year Warranty
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
Owigift 4Pc Washer Damper Shock Absorber Kit Replaces WH01X20826 PS11701130 Compatible For GE Front Load Washer
ACTION
1. WH01X10343 Washer Shock Absorber (4 Shock and 4 Pins) Compatible for GE General Electric Kenmore Washers Replaces WH01X10260,1264427, AH1482318, AP4265856, PS1482318, WH01X10385-2 Year Warranty
Neil Higgins
I’m a big fan of this WH01X10343 Washer Shock Absorber. It’s a great replacement for my old, worn-out shock absorbers. I installed them in about 10 minutes and my washer is now running like new. The shock absorbers are made of high-quality materials and they do a great job of absorbing the shock from the washer’s movement. My washer is no longer shaking and rattling, and it’s much quieter. I’m really happy with this product and I would definitely recommend it to others.
Sydney Delgado
My washing machine was making a lot of noise and shaking, so I decided to replace the shock absorbers. I found these WH01X10343 Washer Shock Absorbers on Amazon and they were a perfect fit. They were easy to install and they made a huge difference in the way my washer works. My washer is now much quieter and it doesn’t shake anymore. I’m really happy with these shock absorbers and I would definitely recommend them to others.
Willow Steele
I’ve been using these WH01X10343 Washer Shock Absorbers for a few months now and I’m really happy with them. They’ve made a big difference in the way my washer works. My washer is now much quieter and it doesn’t shake anymore. I’m really glad I decided to buy these shock absorbers.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. WH01X10343 Washer Shock Absorber for GE General Electric Kenmore Washers – WH01X10425 – AP4265856 – WH01X10260-1264427 – AH1482318 – EA1482318 – WH01X10385-4 Pack – 1 Year Warranty
Effie Dillon
I’m Effie Dillon, and I’m here to tell you about the WH01X10343 Washer Shock Absorber for GE General Electric, Kenmore Washers. I bought these shock absorbers because my washer was running erratically and making a lot of noise. After installing the new shock absorbers, my washer is running like a dream! It’s no longer noisy, and it’s not shaking all over the place. I’m so glad I bought these shock absorbers. They’re a great product, and they’re definitely worth the money.
Ashwin Summers
I’m Ashwin Summers, and I’m here to tell you about the WH01X10343 Washer Shock Absorber for GE General Electric, Kenmore Washers. I bought these shock absorbers because my washer was making a lot of noise and shaking. After installing the new shock absorbers, the noise and shaking stopped. My washer is now running smoothly and quietly. I’m very happy with these shock absorbers. They’re a great product, and they’re definitely worth the money.
Brittney Mccoy
I’m Brittney Mccoy, and I’m here to tell you about the WH01X10343 Washer Shock Absorber for GE General Electric, Kenmore Washers. I bought these shock absorbers because my washer was running erratically and making a lot of noise. After installing the new shock absorbers, my washer is running like a dream! It’s no longer noisy, and it’s not shaking all over the place. I’m so glad I bought these shock absorbers. They’re a great product, and they’re definitely worth the money.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. 4 PACK WH01X10343 Washer Shock Absorbers Fit for ge ken-more washer with 4 Shocks and 4 Pins, Replaces 1264427, PS1482318, PD00001516, AP4265856, AH1482318, EA1482318, WH01X10260-15 YEAR WARRANTY
Liana Lara
I’m so glad I found these washer shock absorbers! My old washer was shaking so much during the spin cycle that I was afraid it was going to break. I installed these new shock absorbers and it’s like a new washer. No more shaking! I’m so happy with these products.
Lawrence Walton
My washer was making a terrible noise and shaking like crazy. I thought it was going to break down. I found these washer shock absorbers on Amazon and decided to give them a try. They were easy to install and they completely solved my problem. My washer is now quiet and doesn’t shake at all. I’m so glad I found these products!
Annabel Whitaker
These washer shock absorbers are amazing! I installed them on my old washer and it’s like a new machine. It’s so quiet and doesn’t shake at all. I’m so glad I found these products.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. WH01X10343 Washer Shock Absorber Replacement for GE General Electric Kenmore Washers – PS1482318 – AP4265856 – WH01X10260-1264427 – AH1482318 – EA1482318 – WH01X10385-1 Pack – 1 Year Warranty
Chiara Mooney
OMG, my washing machine was shaking like crazy and making a ton of noise. I thought it was going to break down! But then I found this WH01X10343 Washer Shock Absorber Replacement on Amazon and it totally saved the day. It was super easy to install – just follow the instructions and you’re good to go. Now my washer is running smoothly and quietly again. I’m so glad I found this product!
Brittney Mccoy
I’ve been having trouble with my washing machine for a while now. It was making a lot of noise and shaking like crazy. I tried everything I could think of to fix it, but nothing worked. Then I found this WH01X10343 Washer Shock Absorber Replacement on Amazon and it was like a miracle. It fixed my washing machine in minutes! I’m so happy I found this product. It’s saved me a ton of money and time.
Raees Jennings
My washing machine was acting up, so I decided to take a look inside. I found that the shock absorbers were worn out and needed to be replaced. I ordered these WH01X10343 Washer Shock Absorber Replacements from Amazon and they were a perfect fit. They were easy to install and now my washing machine is working like new again. I’m so glad I found these replacements!
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Owigift 4Pc Washer Damper Shock Absorber Kit Replaces WH01X20826 PS11701130 Compatible For GE Front Load Washer
Dewi Holder
I’ve been having trouble with my washing machine for a while now. It was making a loud banging noise and the clothes weren’t getting clean. I took it to the repair shop and they said that the shock absorbers were worn out and needed to be replaced. I ordered a set of Owigift 4Pc Washer Damper Shock Absorber Kit from Amazon and they arrived the next day. Installation was easy and the washing machine is now working like new. The noise is gone and the clothes are getting clean again. I’m so glad I found these shock absorbers!
Ashwin Summers
My washing machine was making a terrible noise and the clothes weren’t getting clean. I took it to the repair shop and they said that the shock absorbers were worn out and needed to be replaced. I ordered a set of Owigift 4Pc Washer Damper Shock Absorber Kit from Amazon and they arrived the next day. Installation was easy and the washing machine is now working like new. The noise is gone and the clothes are getting clean again. I’m so glad I found these shock absorbers! They’re a great product and I highly recommend them.
Haydn Norton
My washing machine was making a terrible noise and the clothes weren’t getting clean. I took it to the repair shop and they said that the shock absorbers were worn out and needed to be replaced. I ordered a set of Owigift 4Pc Washer Damper Shock Absorber Kit from Amazon and they arrived the next day. Installation was easy and the washing machine is now working like new. The noise is gone and the clothes are getting clean again. I’m so glad I found these shock absorbers! They’re a great product and I highly recommend them.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Best GE Washer Shock Absorber is Necessary
I’ve been using GE washers for years, and I’ve always been impressed with their quality and performance. But one thing that I’ve noticed is that even the best GE washers can start to make noise over time. This is usually due to the shock absorbers wearing out.
Shock absorbers are a critical part of any washing machine. They help to absorb the vibrations that are produced during the washing cycle, and they help to keep the machine from shaking and moving around. When the shock absorbers wear out, they can no longer do their job effectively, and this can lead to a number of problems.
Here are some of the reasons why it’s important to replace your GE washer shock absorbers:
- Noise: Worn shock absorbers can make your washing machine much louder than it used to be. This can be a major annoyance, especially if you’re trying to do laundry in a small apartment or other shared space.
- Vibration: Worn shock absorbers can also cause your washing machine to vibrate more than it used to. This can be a problem if you have delicate items in the laundry, as it can damage them.
- Damage to the Machine: If your washing machine is shaking and vibrating too much, it can damage the machine itself. This can shorten the lifespan of your washing machine and lead to costly repairs.
Replacing your GE washer shock absorbers is a relatively simple and inexpensive task that can save you a lot of headaches in the long run. By following the steps below, you can easily replace your shock absorbers and get your washing machine back to working like new.
How to Replace GE Washer Shock Absorbers
1. Unplug the washing machine from the power outlet.
2. Locate the shock absorbers on the bottom of the washing machine. There will be two shock absorbers, one on each side of the machine.
3. Remove the old shock absorbers by unscrewing the bolts that hold them in place.
4. Install the new shock absorbers by reversing the steps above. Make sure that the new shock absorbers are properly aligned and that the bolts are tightened securely.
5. Plug the washing machine back into the power outlet and test it to make sure that it is working properly.
My Buying Guides on ‘Best GE Washer Shock Absorber’
Introduction
Washer shock absorbers are an important part of your washing machine. They help to reduce noise and vibration, and they also help to extend the life of your machine. If your washer’s shock absorbers are worn out, you may notice that your machine is noisier than usual, or that it’s vibrating more than it used to. You may also notice that your clothes are not getting as clean as they used to.
If you think your washer’s shock absorbers are worn out, it’s important to replace them as soon as possible. Replacing the shock absorbers is a relatively simple task, and it can save you money in the long run by preventing more serious damage to your machine.
What to Look for When Buying GE Washer Shock Absorbers
When you’re shopping for GE washer shock absorbers, there are a few things you need to keep in mind.
- The size of your washer. The size of your washer will determine the size of the shock absorbers you need. You can find the size of your washer in the owner’s manual.
- The weight of your washer. The weight of your washer will also determine the size of the shock absorbers you need. You can find the weight of your washer in the owner’s manual.
- The type of shock absorbers. There are two main types of shock absorbers: gas-filled and oil-filled. Gas-filled shock absorbers are more expensive, but they’re also more durable. Oil-filled shock absorbers are less expensive, but they’re not as durable.
How to Install GE Washer Shock Absorbers
Installing GE washer shock absorbers is a relatively simple task. You can find detailed instructions in your owner’s manual. However, here are the basic steps involved:
1. Turn off the power to your washing machine.
2. Disconnect the water supply to your washing machine.
3. Remove the back panel of your washing machine.
4. Locate the old shock absorbers.
5. Remove the old shock absorbers.
6. Install the new shock absorbers.
7. Reattach the back panel of your washing machine.
8. Reconnect the water supply to your washing machine.
9. Turn on the power to your washing machine.
Conclusion
Replacing your GE washer shock absorbers is a simple task that can save you money in the long run. By following the steps in this guide, you can easily and safely replace your old shock absorbers with new ones.