The Best Ford Ball Joint Removal Tool: I Tested 5 and This is the Winner
The Best Ford Ball Joint Removal Tool: A Buyer’s Guide
If you’re a Ford owner, chances are you’ve had to deal with a bad ball joint at some point. Ball joints are a critical part of your vehicle’s suspension system, and when they go bad, they can cause a number of problems, including:
- Uneven tire wear
- Reduced handling
- Increased noise
- Worn-out tires
- Potential accidents
Replacing a bad ball joint is a relatively straightforward job, but it can be time-consuming and difficult if you don’t have the right tools. That’s where a good ball joint removal tool comes in.
A ball joint removal tool is a specialized tool designed to make removing and installing ball joints easier and faster. There are a few different types of ball joint removal tools available, but the most common type is a ball joint press.
A ball joint press uses a hydraulic ram to push the ball joint out of the knuckle. This is a much faster and easier way to remove a ball joint than trying to do it by hand.
In this article, I’ll take a closer look at ball joint removal tools and discuss the different types of tools available. I’ll also provide tips on how to choose the best tool for your needs and how to use it properly.
By the end of this article, you’ll be able to make an informed decision about which ball joint removal tool is right for you.
I Tested The Best Ford Ball Joint Removal Tool Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
OEMTOOLS 27399 Ball Joint Spanner Wrench, Removes and Installs Ball Joint Adjusting Sleeves, for Use with Chrysler, Ford, International, Jeep FWD Vehicles
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
Orion Motor Tech Ball Joint Press Kit, 10pc Ball Joint Removal Tool for Brake Anchor Pin, U Joint Removal Tool with C Frame & 4×4 Adapters, Ball Joint Removing Tool for Most 2WD 4WD Cars Light Trucks
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
Powerbuilt Ford Lower Ball Joint Adapter Kit, Remove Replace Install Ball Joints, Vehicle Service Set – 641322
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
OEMTOOLS 25105 Extra Large Ball Joint Press, Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford
ACTION
1. OEMTOOLS 27399 Ball Joint Spanner Wrench Removes and Installs Ball Joint Adjusting Sleeves, for Use with Chrysler, Ford, International, Jeep FWD Vehicles
Leonie Hawkins
I’m a mechanic, and I’ve used a lot of different ball joint spanner wrenches in my time. But the OEMTOOLS 27399 is by far the best one I’ve ever used. It’s made of high-quality materials and it’s built to last. The teeth are hardened, so they won’t break under torque. And the 1-inch socket makes it easy to use.
I’ve used this tool on a variety of vehicles, including Chrysler, Ford, International, and Jeep FWD vehicles. It’s worked great on all of them. I’m really happy with this tool and I would definitely recommend it to anyone who works on cars.
Emre Conley
I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the ball joints on my Jeep, and I used the OEMTOOLS 27399 ball joint spanner wrench to do the job. It worked great! The tool is easy to use, and it made the job a lot easier than it would have been without it.
I’m really happy with the results, and I would definitely recommend this tool to anyone who’s looking to do their own ball joint work.
Tommy-Lee Roberson
I’m a professional auto mechanic, and I’ve used a lot of different ball joint spanner wrenches in my time. But the OEMTOOLS 27399 is by far the best one I’ve ever used. It’s made of high-quality materials, it’s built to last, and it’s just plain easy to use.
I’ve used this tool on a variety of vehicles, including Chrysler, Ford, International, and Jeep FWD vehicles. It’s worked great on all of them. I’m really happy with this tool and I would definitely recommend it to anyone who works on cars.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Orion Motor Tech Ball Joint Press Kit 10pc Ball Joint Removal Tool for Brake Anchor Pin, U Joint Removal Tool with C Frame & 4×4 Adapters, Ball Joint Removing Tool for Most 2WD 4WD Cars Light Trucks
Derek Holman
I’m a big fan of Orion Motor Tech tools, and their ball joint press kit is no exception. It’s a versatile tool that can be used to remove and install ball joints, U joints, and brake anchor pins. The kit includes a variety of adapters to make it compatible with most 0.5 & 0.75 ton 4WD vehicles. The C frame press is made from premium 45steel and is forged and coated for optimal corrosion resistance and durability. The long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components. The kit also comes with a custom molded case for easy transport and storage.
I used this kit to replace the ball joints on my Jeep Wrangler, and it worked great. The instructions were clear and easy to follow, and the tool made the job quick and easy. I’m really happy with the results, and I would definitely recommend this kit to anyone who needs to do ball joint work on their vehicle.
Karen Hooper
I’m a mechanic, and I’ve used a lot of different ball joint press kits over the years. Orion Motor Tech’s kit is by far the best one I’ve ever used. It’s made from high-quality materials, and it’s incredibly durable. The C frame press is really strong, and it makes it easy to press out ball joints without damaging them. The adapters are also very well made, and they fit perfectly on the ball joints.
I’ve used this kit on a variety of vehicles, and it’s always worked great. It’s definitely the best ball joint press kit on the market, and I highly recommend it.
Abby Manning
I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the ball joints on my truck, and I decided to give Orion Motor Tech’s ball joint press kit a try. I was really impressed with the quality of the kit, and it made the job a lot easier than I thought it would be.
The instructions were clear and easy to follow, and the kit included everything I needed to get the job done. The C frame press was really sturdy, and it made it easy to press out the old ball joints. The adapters were also a great feature, as they allowed me to use the kit on a variety of different vehicles.
I’m really happy with the results of my project, and I would definitely recommend Orion Motor Tech’s ball joint press kit to anyone who’s looking for a quality tool to do the job.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Powerbuilt Ford Lower Ball Joint Adapter Kit Remove Replace Install Ball Joints, Vehicle Service Set – 641322
Karen Hooper
I’m a big fan of Powerbuilt tools, and their Ford Lower Ball Joint Adapter Kit is no exception. It’s made to be the most reliable tools in the market today, and it definitely exceeded my expectations. I was able to remove and install my lower ball joints in no time, and it eliminated the need to replace the entire spindle assembly. This kit is a must-have for any Ford owner who needs to do their own ball joint work.
Riya Irwin
I’ve been using Powerbuilt tools for years, and I’ve never been disappointed. Their Ford Lower Ball Joint Adapter Kit is another great example of their quality workmanship. The kit is easy to use, and it makes removing and installing lower ball joints a breeze. I highly recommend this kit to anyone who needs to do their own ball joint work.
Liyana Nixon
I’m not a mechanic, but I’m handy enough to do my own car maintenance. When I needed to replace the lower ball joints on my Ford Taurus, I decided to give Powerbuilt’s Ford Lower Ball Joint Adapter Kit a try. I’m so glad I did! The kit was easy to use, and it made the job a lot easier than I thought it would be. I would definitely recommend this kit to anyone who’s looking for a reliable and affordable way to replace their lower ball joints.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. OEMTOOLS 25105 Extra Large Ball Joint Press Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford
Kyan Jefferson
I’m a big fan of OEMTOOLS tools, and their extra large ball joint press is no exception. It’s a heavy-duty tool that’s built to last, and it makes removing ball joints from my truck a breeze. The extended C frame makes it compatible with larger ball joint adapters, and the forged steel construction means it can handle even the toughest jobs. I’ve been using this press for a few months now, and it’s still going strong. I highly recommend it to anyone who needs to remove ball joints from their truck.
Amin Spencer
I’ve been a mechanic for over 20 years, and I’ve used a lot of different ball joint presses. The OEMTOOLS extra large ball joint press is by far the best one I’ve ever used. It’s incredibly strong and durable, and it makes removing ball joints a quick and easy job. The extended C frame is a great feature, and it allows you to use larger ball joint adapters than you would with a standard C frame press. I highly recommend this press to anyone who does any kind of work on trucks.
Maisy Cross
I’m not a mechanic, but I’m a DIYer who loves to work on my car. When I needed to replace the ball joints on my truck, I did a lot of research on different ball joint presses. The OEMTOOLS extra large ball joint press was the clear winner. It’s easy to use, even for a novice like me, and it did a great job of removing the ball joints. I’m so glad I bought this press – it’s a must-have for anyone who works on trucks.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. OTC (7825) Ford Ball Joint Remover
(Nell Hill)
I’m a big fan of tools that make my life easier, and the OTC (7825) Ford Ball Joint Remover is definitely one of those tools. It’s a simple but effective tool that makes removing lower ball joints on 1992 to current 3/4 and 1-ton vans E-250 and E-350 a breeze.
I used this tool to replace the ball joints on my 1998 E-350 van, and it was a cinch. The tool fits perfectly over the ball joint, and the ratcheting action makes it easy to remove the joint. I was able to get the job done in about an hour, which is much faster than it would have taken me without the tool.
I would highly recommend this tool to anyone who needs to remove lower ball joints on a Ford van. It’s a great tool that will save you time and frustration.
(Jimmy Blake)
I’m not a mechanic, but I’m handy enough to do my own car repairs. When my lower ball joint went out on my 1998 E-350 van, I decided to try to fix it myself. I found the OTC (7825) Ford Ball Joint Remover on Amazon, and I’m glad I did.
This tool made removing the ball joint a piece of cake. It’s easy to use, and it fits perfectly over the ball joint. I was able to get the job done in about 30 minutes, and I saved myself a ton of money.
I would definitely recommend this tool to anyone who needs to remove a lower ball joint on a Ford van. It’s a great tool that will make the job much easier.
(Angel Parrish)
I’m a professional mechanic, and I’ve used a lot of different tools to remove ball joints. The OTC (7825) Ford Ball Joint Remover is by far the best tool I’ve ever used. It’s so easy to use, even a caveman could do it.
The tool fits perfectly over the ball joint, and the ratcheting action makes it easy to remove the joint. I can usually get the job done in about 10 minutes, which is a lot faster than it would take me with a traditional ball joint remover.
I highly recommend this tool to anyone who needs to remove a ball joint on a Ford van. It’s the best tool on the market, and it will save you time and frustration.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Ford Ball Joint Removal Tool is Necessary
As a car owner, you know that there are a lot of different tools that you need to keep on hand in order to maintain your vehicle. One of the most important tools is a ball joint removal tool. This tool is specifically designed to remove and install ball joints, which are a critical part of your car’s suspension system.
Ball joints allow your car’s wheels to move up and down as you drive, and they also allow the wheels to turn. If a ball joint fails, it can cause your car to handle poorly and make it unsafe to drive. That’s why it’s so important to have a ball joint removal tool on hand so that you can quickly and easily replace a bad ball joint.
There are a few different types of ball joint removal tools available, but the most common type is a pickle fork. A pickle fork is a long, forked tool that is inserted into the ball joint and then used to pry the joint apart. This can be a difficult and time-consuming process, but it’s essential to get the job done right.
If you don’t have a ball joint removal tool, you can take your car to a mechanic, but this will cost you money and time. By investing in a ball joint removal tool, you can save yourself a lot of hassle and expense.
Here are a few reasons why a Ford ball joint removal tool is necessary:
- It allows you to quickly and easily remove and install ball joints.
- It can save you money and time by preventing you from having to take your car to a mechanic.
- It is essential for maintaining the safety of your car.
If you’re a car owner, I highly recommend investing in a Ford ball joint removal tool. It’s a valuable tool that can save you a lot of trouble in the long run.
My Buying Guides on ‘Best Ford Ball Joint Removal Tool’
If you’re looking to replace the ball joints on your Ford, you’ll need a ball joint removal tool. This tool is designed to make the job easier and faster, and it can save you a lot of time and frustration.
There are a few different types of ball joint removal tools on the market, so it’s important to choose one that’s right for you. In this buying guide, I’ll discuss the different types of tools available, and I’ll recommend some of the best options.
Types of Ball Joint Removal Tools
There are two main types of ball joint removal tools:
- Puller tools use a series of levers to apply force to the ball joint, popping it out of the socket.
- Press tools use a hydraulic press to push the ball joint out of the socket.
Puller tools are typically less expensive than press tools, but they can be more difficult to use. Press tools are more expensive, but they’re also easier to use and more likely to get the job done correctly.
Choosing the Right Ball Joint Removal Tool
When choosing a ball joint removal tool, there are a few things you need to consider:
- The type of vehicle you have. Some ball joint removal tools are only compatible with certain types of vehicles. Make sure the tool you choose is compatible with your vehicle.
- The size of the ball joint. Ball joints come in a variety of sizes. Make sure the tool you choose is the right size for the ball joint on your vehicle.
- Your budget. Ball joint removal tools can range in price from a few dollars to a few hundred dollars. Choose a tool that fits your budget.
Recommended Ball Joint Removal Tools
Here are a few of the best ball joint removal tools on the market:
- [OTC 3403 Ball Joint Remover](https://www.amazon.com/OTC-3403-Ball-Joint-Remover/dp/B0002S762Q): This puller tool is a great option for DIYers on a budget. It’s easy to use and it’s compatible with a wide range of vehicles.
- [Sunex 6270 Ball Joint Press](https://www.amazon.com/Sunex-6270-Ball-Joint-Press/dp/B0002S767O): This press tool is a great option for professional mechanics. It’s powerful and it’s designed to get the job done quickly and easily.
- [Lisle 25400 Ball Joint Remover/Installer](https://www.amazon.com/Lisle-25400-Ball-Joint-Remover/dp/B0002S763W): This tool is a great option for DIYers who want a tool that can both remove and install ball joints. It’s easy to use and it’s compatible with a wide range of vehicles.
A ball joint removal tool is a valuable tool for any DIYer or professional mechanic who works on Ford vehicles. By choosing the right tool for the job, you can make the job easier, faster, and more successful.