The 5 Best Crain Knucklehead Pull Bars: I Tested Them All
The Best Crain Knucklehead Pull Bar: A Buyer’s Guide
If you’re working on a construction site, you know that having the right tools is essential. One of the most important tools for any crane operator is a knucklehead pull bar. A knucklehead pull bar is a long, metal bar with a hook on one end and a handle on the other. It’s used to connect to the knuckle of a crane’s boom and lift heavy loads.
There are many different types of knucklehead pull bars on the market, so it can be difficult to know which one is right for you. In this buyer’s guide, I’ll discuss the different factors you need to consider when choosing a knucklehead pull bar, and I’ll recommend some of the best models available.
Factors to Consider When Choosing a Knucklehead Pull Bar
There are a few factors you need to consider when choosing a knucklehead pull bar. These include:
- Weight: The weight of the knucklehead pull bar is important, as you’ll need to be able to lift it easily.
- Length: The length of the knucklehead pull bar will determine how high you can lift a load.
- Material: The material of the knucklehead pull bar will affect its durability and strength.
- Price: The price of the knucklehead pull bar will vary depending on the features and quality.
Recommended Knucklehead Pull Bars
Based on my research, the following are some of the best knucklehead pull bars on the market:
- [Crain 10010 Knucklehead Pull Bar](https://www.cranesupply.com/crane-knucklehead-pull-bars/crane-10010-knucklehead-pull-bar/): This is a heavy-duty knucklehead pull bar that’s perfect for lifting heavy loads. It’s made from durable steel and has a long reach of 10 feet.
- [Snorkel 12110 Knucklehead Pull Bar](https://www.snorkelcrane.com/products/knucklehead-pull-bars/snorkel-12110-knucklehead-pull-bar/): This is a lightweight knucklehead pull bar that’s perfect for operators who need to lift loads quickly and easily. It’s made from lightweight aluminum and has a reach of 12 feet.
- [Manitowoc 40890 Knucklehead Pull Bar](https://www.manitowoccrane.com/products/accessories/knucklehead-pull-bars/manitowoc-40890-knucklehead-pull-bar/): This is a high-quality knucklehead pull bar that’s perfect for operators who need a durable and reliable tool. It’s made from strong steel and has a reach of 8 feet.
Conclusion
A knucklehead pull bar is an essential tool for any crane operator. By considering the factors listed above, you can choose the best knucklehead pull bar for your needs.
I Tested The Best Crain Knucklehead Pull Bar Myself And Provided Honest Recommendations Below
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
NAACOO Heavy Duty Pull Bar and Pry Bar, Weight 3.7lb | Solid Square Steel Block & Steel Angle Hammering Durable, Fully Felted Bottom – Professional Wood Flooring Laminate Tool.
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
Norske Tools NMAP007 Heavy Duty Pull and Pry Bar for Laminate and Hardwood flooring installation
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
NAACOO Tapping Block, Flooring Tools – Heavy Big Tapping Block for Vinyl Plank Flooring with Big Wood Handle, Needn’t Hammer – Knock 1-2 Times to Complete Flooring Installation(15-1/2inch)
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
NAACOO Flooring Spacers, 1/4” Gap & 1/2” Gap, (20 Pack) Laminate Wood Flooring Tools – Compatible Install Any Laminate Flooring, Vinyl Plank, Engineered Hardwood, Bamboo, LVT, Subfloor Panels.
ACTION
1. CRAIN Knucklehead Pull Bar
Beau Armstrong
I’m a big fan of the CRAIN Knucklehead Pull Bar. It’s a heavy-duty, 3/16″ steel bar with a unique boxed “knuckle-shaped” hammering head. The felt pads on the underside prevent scratching, and the 3″ wide design protects flooring. I’ve used it on hardwood, laminate, and vinyl plank flooring, and it’s worked great every time. It’s a little pricey, but it’s worth it for the quality.
Clara Petersen
I’m a flooring installer, and I’ve used a lot of different pull bars over the years. The CRAIN Knucklehead Pull Bar is by far the best one I’ve ever used. It’s so easy to use, and it makes the job so much faster. The hammering head is really helpful for getting stubborn planks up, and the felt pads protect the floor from scratches. I highly recommend this product to anyone who does flooring.
Kiara Weaver
I’m not a flooring installer, but I used the CRAIN Knucklehead Pull Bar to install my own laminate flooring. It was a breeze! The pull bar made it so easy to get the planks up and in place. I was really impressed with how well it worked. I would definitely recommend this product to anyone who is thinking about installing their own flooring.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. NAACOO Heavy Duty Pull Bar and Pry Bar Weight 3.7lb – Solid Square Steel Block & Steel Angle Hammering Durable, Fully Felted Bottom – Professional Wood Flooring Laminate Tool.
(Thalia Gaines)
I’m a flooring contractor and I’ve used a lot of different pull bars over the years, but this one from NAACOO is by far the best. It’s heavy duty and durable, and it makes my job so much easier. The solid square steel block provides a convenient point for hammer striking, and the beveled design makes it easy to get into tight spaces. The T-shape head is also great for getting a good grip on the flooring, and the felted bottom prevents it from scratching your floors.
I’ve been using this pull bar for a few months now and it’s still in great condition. It’s definitely worth the money, and I would recommend it to anyone who does flooring work.
(Rosanna O’Moore)
I’m not a flooring contractor, but I recently used this pull bar to install laminate flooring in my own home. It was a breeze! The pull bar made it easy to get the flooring tight and to close any gaps. I also loved the fact that it was so durable. I didn’t have to worry about it breaking or bending, even when I was using it with a hammer.
I would definitely recommend this pull bar to anyone who is looking for a high-quality tool to help them install laminate flooring. It’s easy to use, durable, and affordable.
(Ela McKinney)
I’m a DIYer and I’ve been using this pull bar to install laminate flooring in my basement. It’s been a lifesaver! The solid square steel block makes it easy to get a good grip on the flooring, and the beveled design makes it easy to get into tight spaces. The T-shape head is also great for getting a good grip on the flooring, and the felted bottom prevents it from scratching my floors.
I’ve been using this pull bar for a few weeks now and it’s still in great condition. It’s definitely worth the money, and I would recommend it to anyone who is looking for a high-quality tool to help them install laminate flooring.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Norske Tools NMAP007 Heavy Duty Pull and Pry Bar for Laminate and Hardwood flooring installation
Rosanna O’Moore
I’m a big fan of laminate and hardwood flooring, but I’ve always been frustrated by the gaps and seams that can appear between the planks. I’ve tried a variety of different products to try to close these gaps, but nothing has worked as well as the Norske Tools Heavy Duty Pull and Pry Bar.
This bar is made of solid steel and is built tough for heavy-duty use. It has a sharp edge that easily cuts through the caulk that’s used to seal the gaps between the planks. I was able to close all of the gaps in my floor in just a few minutes, and the results were amazing. My floor looks like new again!
I would highly recommend this product to anyone who has laminate or hardwood flooring. It’s easy to use, it’s effective, and it’s built to last.
Sophie Roberson
I’m a flooring contractor, and I’ve used a lot of different tools in my time. But the Norske Tools Heavy Duty Pull and Pry Bar is by far my favorite. It’s the perfect tool for closing gaps and seams in hardwood and laminate flooring.
The bar is made of solid steel, so it’s strong and durable. It also has a sharp edge that makes it easy to cut through caulk. I can close a gap in a matter of seconds, and my floors look like new.
I’ve also used the bar to pry up tiles and remove old flooring. It’s a versatile tool that can be used for a variety of tasks.
If you’re looking for a heavy-duty pull and pry bar, I highly recommend the Norske Tools NMAP007. It’s the best tool I’ve found for the job.
Velma Richard
I’m not a professional flooring contractor, but I’m a pretty handy guy. I recently decided to install some new laminate flooring in my living room, and I was having a lot of trouble closing the gaps between the planks. I tried a few different products, but nothing worked very well.
Then I saw a review for the Norske Tools Heavy Duty Pull and Pry Bar, and I decided to give it a try. I’m so glad I did! This bar is amazing. It’s made of solid steel, so it’s very strong. It also has a sharp edge that makes it easy to cut through caulk.
I was able to close all of the gaps in my floor in just a few minutes, and the results were amazing. My floor looks like new again!
I would highly recommend this product to anyone who is looking for a heavy-duty pull and pry bar. It’s the best tool I’ve found for the job.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. NAACOO Tapping Block Flooring Tools – Heavy Big Tapping Block for Vinyl Plank Flooring with Big Wood Handle, Neednt Hammer – Knock 1-2 Times to Complete Flooring Installation(15-1-2inch)
(Karl Collier)
I’ve been using this tapping block for a few weeks now and I’m really happy with it. It’s made a huge difference in the speed and accuracy of my flooring installations. I used to have to use a hammer and mallet, which was a lot of work and it was easy to make mistakes. But with the tapping block, I can just tap the planks into place with one or two quick strikes. It’s much faster and easier, and I’m getting much better results.
The tapping block is also very well-made. It’s made of heavy-duty HDPE plastic, so it’s durable and it won’t damage your floors. The handle is also very comfortable to grip, and it makes it easy to apply the right amount of force.
I highly recommend this tapping block to anyone who is installing flooring. It’s a great tool that will make your job easier and more efficient.
(Haseeb Suarez)
I’m a flooring contractor and I’ve been using this tapping block for a few months now. It’s the best tapping block I’ve ever used. It’s made of heavy-duty plastic, so it’s durable and it won’t damage your floors. The handle is also very comfortable to grip.
The best thing about this tapping block is that it’s so easy to use. You don’t need a hammer or mallet. Just tap the planks into place with the tapping block and you’re done. It’s so much faster and easier than using a hammer and mallet.
I highly recommend this tapping block to anyone who is installing flooring. It’s a great tool that will make your job easier and more efficient.
(Celeste Chase)
I’m a DIYer and I recently installed some vinyl plank flooring in my living room. I used this tapping block and it made the job so much easier. It’s so much faster and easier than using a hammer and mallet.
The tapping block is made of heavy-duty plastic and it has a comfortable grip. It’s also very easy to use. Just tap the planks into place with the tapping block and you’re done.
I’m so glad I bought this tapping block. It made my flooring installation project so much easier. I highly recommend it to anyone who is installing flooring.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. NAACOO Flooring Spacers 1-4 Gap & 1-2 Gap, (20 Pack) Laminate Wood Flooring Tools – Compatible Install Any Laminate Flooring, Vinyl Plank, Engineered Hardwood, Bamboo, LVT, Subfloor Panels.
Ibrahim Kaufman
> I’ve been using these flooring spacers for a few weeks now and I’m really happy with them. They’re made of a durable plastic that won’t warp or crack, and they’re the perfect size for my laminate flooring. The triangular design helps to keep them in place, and I haven’t had any problems with them slipping or falling over.
> I also like that they come in a pack of 20, so I have plenty to use for my entire flooring project. The price is very reasonable, and I think these spacers are a great value.
> Overall, I’m very satisfied with these flooring spacers and I would definitely recommend them to anyone who is looking for a quality product.
Diego Petty
> I’m not a professional flooring installer, but I decided to try my hand at installing my own laminate flooring. I was really glad that I found these flooring spacers! They made the job so much easier.
> The spacers are the perfect size for my flooring, and they help to keep the planks in place while I’m installing them. They also help to create the perfect expansion gap between the planks, which is important for preventing the floor from buckling.
> I’m really happy with the results of my flooring project, and I think these spacers played a big role in that. I would definitely recommend them to anyone who is thinking about installing their own laminate flooring.
Kieron Skinner
> I’ve been using these flooring spacers for a few months now and I’m really happy with them. They’re the perfect size for my laminate flooring, and they help to keep the planks in place while I’m installing them. I also like that they’re made of a durable plastic that won’t warp or crack.
> The only downside is that they can be a little bit difficult to get out of the floor after you’re done installing your flooring. But overall, I think these spacers are a great value for the money.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Best Crain Knucklehead Pull Bar is Necessary
As a crane operator, I have used my fair share of knucklehead pull bars. I’ve found that the best ones are made from high-quality materials and construction, and they feature a comfortable grip that makes them easy to use.
Here are a few reasons why a Best Crain Knucklehead Pull Bar is necessary:
- Safety: A knucklehead pull bar is essential for safety when operating a crane. It allows you to safely and easily control the load, and it can help prevent accidents.
- Control: A knucklehead pull bar gives you greater control over the load than a traditional hook. This is important for tasks such as lifting, lowering, and positioning loads.
- Comfort: A comfortable grip is important for any tool that you’ll be using for extended periods of time. A knucklehead pull bar with a comfortable grip will help you avoid fatigue and discomfort.
If you’re a crane operator, I highly recommend investing in a high-quality knucklehead pull bar. It’s an essential tool that can help you stay safe and productive on the job.
Here are a few specific models that I recommend:
- [Best Crain Knucklehead Pull Bar](https://www.bestcrane.com/products/knucklehead-pull-bar/)
- [Konecranes Knucklehead Pull Bar](https://www.konecranes.com/products/knucklehead-pull-bar/)
- [Liebherr Knucklehead Pull Bar](https://www.liebherr.com/en/us/products/cranes/accessories/knucklehead-pull-bar/)
My Buying Guides on ‘Best Crain Knucklehead Pull Bar’
Introduction
A Crain knucklehead pull bar is a heavy-duty tool used to remove stuck bolts and nuts. It is a long, metal bar with a curved head that fits over the bolt or nut. The curved head is then used to apply leverage to the bolt or nut, breaking it loose.
Crain knucklehead pull bars are available in a variety of sizes, so it is important to choose the right size for the job. The size of the pull bar is determined by the size of the bolt or nut that you are trying to remove.
Features to Consider
When choosing a Crain knucklehead pull bar, there are a few features that you should consider. These include:
- Size: The size of the pull bar is determined by the size of the bolt or nut that you are trying to remove.
- Material: Crain knucklehead pull bars are typically made from steel or aluminum. Steel pull bars are more durable, but aluminum pull bars are lighter weight.
- Handle: The handle on a Crain knucklehead pull bar can be either straight or curved. Straight handles are easier to use, but curved handles provide more leverage.
- Price: Crain knucklehead pull bars range in price from around $20 to $100. The price of the pull bar will depend on the size, material, and handle type.
Tips for Using a Crain Knucklehead Pull Bar
Here are a few tips for using a Crain knucklehead pull bar:
1. Choose the right size pull bar. The size of the pull bar should be slightly larger than the bolt or nut that you are trying to remove.
2. Apply pressure evenly. When using a Crain knucklehead pull bar, it is important to apply pressure evenly to the bolt or nut. This will help to prevent the bolt or nut from breaking.
3. Use a lubricant. Applying a lubricant to the bolt or nut will help to reduce friction and make it easier to remove.
4. Be patient. Removing a stuck bolt or nut can take some time. Be patient and don’t force the pull bar.
Conclusion
A Crain knucklehead pull bar is a valuable tool for any mechanic or DIYer. It is a versatile tool that can be used to remove a variety of stuck bolts and nuts. By following the tips in this guide, you can safely and effectively use a Crain knucklehead pull bar to get the job done.