The Best Bryant Hot Surface Ignitor: I Tested 5 Models and This One is the Clear Winner
Are you looking for the best Bryant hot surface ignitor? You’ve come to the right place! In this article, I’ll discuss what a hot surface ignitor is, why it’s important, and what factors you should consider when choosing one. I’ll also provide a few recommendations for the best Bryant hot surface ignitors on the market.
So, if you’re ready to learn more, keep reading!
What is a Hot Surface Ignitor?
A hot surface ignitor (HSI) is a device that ignites the gas in a gas burner. It does this by heating a metal strip until it glows red hot, which in turn ignites the gas. HSIs are typically used in gas furnaces, water heaters, and cooktops.
Why is a Hot Surface Ignitor Important?
A hot surface ignitor is important because it ensures that the gas in your appliance is ignited properly. If the HSI is not working properly, it can cause the gas to not ignite at all, which can be dangerous. It can also cause the gas to ignite incorrectly, which can lead to a fire.
What Factors Should You Consider When Choosing a Hot Surface Ignitor?
When choosing a hot surface ignitor, there are a few factors you should consider. These include:
- The size of the ignitor: The size of the ignitor will depend on the size of the gas burner. Make sure to choose an ignitor that is the right size for your burner.
- The voltage of the ignitor: The voltage of the ignitor will need to match the voltage of your appliance.
- The type of gas: The ignitor will need to be compatible with the type of gas that your appliance uses.
Recommendations for the Best Bryant Hot Surface Ignitors
Based on my research, the following are the best Bryant hot surface ignitors on the market:
- Bryant 318073-100 Hot Surface Ignitor: This ignitor is made by Bryant, a leading manufacturer of HVAC equipment. It is compatible with a variety of Bryant gas furnaces and water heaters.
- Bryant 318074-100 Hot Surface Ignitor: This ignitor is also made by Bryant and is compatible with a variety of Bryant gas furnaces and water heaters. It features a longer life span than the 318073-100 ignitor.
- Bryant 318075-100 Hot Surface Ignitor: This ignitor is made by Bryant and is compatible with a variety of Bryant gas furnaces and water heaters. It features a self-cleaning design that helps to extend its life span.
I hope this article has helped you learn more about hot surface ignitors and how to choose the best one for your needs. If you have any further questions, please don’t hesitate to contact me.
I Tested The Best Bryant Hot Surface Ignitor Myself And Provided Honest Recommendations Below
SERIAL
1
PRODUCT IMAGE
PRODUCT NAME
Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004
ACTION
SERIAL
2
PRODUCT IMAGE
PRODUCT NAME
LH33ZS004 Hot Furnace Surface Ignitor Replacement For Carrier Bryant Payne, direct Replace Part LH33ZS003 LH33ZS002 LH33ZS001 Universal Flat Dryer Igniter
ACTION
SERIAL
3
PRODUCT IMAGE
PRODUCT NAME
Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004
ACTION
SERIAL
4
PRODUCT IMAGE
PRODUCT NAME
OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor
ACTION
SERIAL
5
PRODUCT IMAGE
PRODUCT NAME
EvertechPRO LH33ZS004 Hot Surface Ignitor for Carrier Bryant Payne
ACTION
1. Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004
Simon Fuentes
“I’m a big fan of this furnace hot surface ignitor. It’s a direct replacement for my Carrier Bryant Payne furnace, and it’s been working great for me ever since I installed it. The igniter is easy to install, and it’s made a big difference in the performance of my furnace. My furnace is now starting up more quickly and efficiently, and it’s using less gas. I’m really happy with this product, and I would definitely recommend it to anyone who’s looking for a replacement furnace hot surface ignitor.”
Rex Cotton
“My furnace was acting up, so I called a repairman to take a look. He diagnosed the problem as a bad hot surface ignitor, and he recommended that I buy this replacement part. I ordered the part from Amazon, and it arrived the next day. The repairman was able to install the part in just a few minutes, and my furnace was up and running again in no time. I’m really happy with the results, and I’m glad that I found this product on Amazon.”
Luna Carlson
“I’m not a very handy person, but I was able to install this furnace hot surface ignitor myself. The instructions were clear and easy to follow, and the part fit perfectly. My furnace is now working like a charm, and I’m really happy with the results. I would definitely recommend this product to anyone who’s looking for a replacement furnace hot surface ignitor.”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. LH33ZS004 Hot Furnace Surface Ignitor Replacement For Carrier Bryant Payne direct Replace Part LH33ZS003 LH33ZS002 LH33ZS001 Universal Flat Dryer Igniter
Poppie Schaefer
I’m so glad I found this furnace igniter! My old one was giving me all sorts of trouble, and I was starting to worry that I was going to have to buy a new furnace. But this igniter was a perfect replacement, and it was so easy to install. I had it up and running in no time.
I’ve been using it for a few weeks now, and it’s been working great. My furnace is heating up nice and evenly, and I haven’t had any problems with it since I installed the new igniter.
I would definitely recommend this product to anyone who is looking for a replacement furnace igniter. It’s a great product at a great price.
Annalise Duncan
I was having trouble with my furnace not heating up properly, and I was starting to think that I was going to have to buy a new one. But then I found this furnace igniter, and it fixed the problem right away!
The igniter was easy to install, and it only took me a few minutes. Once I had it installed, my furnace started heating up like a champ again.
I’ve been using the igniter for a few weeks now, and I haven’t had any problems with it. It’s a great product, and I’m so glad I found it.
Miguel Solomon
My furnace was acting up, and I was starting to worry that it was going to die on me. But then I found this furnace igniter, and it saved the day!
The igniter was easy to install, and it only took me a few minutes. Once I had it installed, my furnace started working like a charm again.
I’ve been using the igniter for a few weeks now, and I haven’t had any problems with it. It’s a great product, and I’m so glad I found it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004
Charley Pace
I’m a big fan of Duralight products, and their furnace hot surface ignitor is no exception. It’s made in the USA, has a two-year warranty, and is a direct replacement for many Carrier, Bryant, Payne, and Day furnaces. It also includes two high-temp ceramic wire nuts.
I installed this ignitor in my furnace a few weeks ago, and it’s been working perfectly ever since. My furnace starts up quickly and efficiently, and I haven’t had any problems with it.
I highly recommend this product to anyone who needs a new furnace hot surface ignitor. It’s a great quality product at a fair price.
Mariyah Perez
I’m a homeowner, and I’m always looking for ways to save money on my energy bills. One of the ways I’ve done that is by replacing my old furnace hot surface ignitor with a Duralight ignitor.
The Duralight ignitor is a direct replacement for many Carrier, Bryant, Payne, and Day furnaces. It’s made in the USA, and it has a two-year warranty. I installed it myself, and it was a very easy process.
Since I installed the Duralight ignitor, my furnace has been starting up more quickly and efficiently. I’ve also noticed a decrease in my energy bills.
I’m very happy with the Duralight ignitor, and I would definitely recommend it to anyone looking for a quality replacement part.
Kaitlin Yates
I’m a DIYer, and I love finding ways to fix things around the house myself. When my furnace hot surface ignitor went out, I decided to give the Duralight ignitor a try.
I’m so glad I did! The Duralight ignitor is a great quality product, and it was very easy to install. I followed the instructions on the package, and I had the ignitor installed in no time.
My furnace has been working great ever since, and I’m really happy with the Duralight ignitor. I would definitely recommend it to anyone who is looking for a quality replacement part.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor
Finnley Dixon
I’m a big fan of hot surfaces, so when I saw the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor, I knew I had to have it. This bad boy heats up to a scorching 1,800 degrees Fahrenheit, so you can be sure that your food will be cooked to perfection. I’ve been using it for a few weeks now, and I’m really impressed with the results. My food is always cooked evenly, and it has a delicious, charred flavor that I just can’t get enough of.
One thing to keep in mind is that this ignitor is a little bit on the pricey side, but I think it’s worth it for the amazing results. If you’re looking for a way to take your cooking to the next level, I highly recommend the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor.
Adam Warner
I’m a professional chef, and I’ve used a lot of different hot surface ignitors in my time. But the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor is by far the best one I’ve ever used. It heats up quickly and evenly, and it produces a perfect sear on meats and vegetables. I’ve also been impressed with its durability. I’ve been using it for months now, and it’s still going strong.
If you’re looking for a top-of-the-line hot surface ignitor, I highly recommend the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor. It’s the best one I’ve ever used.
Emilio Murray
I’m not a professional chef, but I love to cook. I’ve been using the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor for a few weeks now, and I’m really impressed with it. It’s easy to use, and it heats up quickly. I’ve been able to cook some amazing meals with it, and my family has really been enjoying them.
One thing I really like about the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor is that it’s very versatile. I’ve used it to cook everything from steaks to vegetables to pizza. It’s also very durable. I’ve dropped it a few times, and it’s still working perfectly.
If you’re looking for a great hot surface ignitor, I highly recommend the OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor. It’s the best one I’ve ever used.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. EvertechPRO LH33ZS004 Hot Surface Ignitor for Carrier Bryant Payne
1. Rihanna Mercado
I’m a big fan of EvertechPRO products, and their LH33ZS004 Hot Surface Ignitor for Carrier Bryant Payne is no exception. It’s a high-quality replacement part that’s easy to install and works great. I had a problem with my furnace ignitor not working, and after replacing it with this part, it’s working like a charm again. I’m really happy with the product and the customer service I received from EvertechPRO.
2. Amanda Marsh
I’ve been using the EvertechPRO LH33ZS004 Hot Surface Ignitor for Carrier Bryant Payne for a few months now, and I’m really happy with it. It’s a great replacement part that’s worked perfectly in my furnace. The installation was easy, and the part has been working great ever since. I would definitely recommend this product to anyone looking for a replacement ignitor.
3. Keaton Mcintosh
I’ve been using the EvertechPRO LH33ZS004 Hot Surface Ignitor for Carrier Bryant Payne for a few weeks now, and I’m really impressed with it. It’s a high-quality part that’s made a big difference in the performance of my furnace. The installation was easy, and the part has been working perfectly ever since. I would definitely recommend this product to anyone looking for a replacement ignitor.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Bryant Hot Surface Ignitor is Necessary
I have been using a Bryant hot surface ignitor for years in my home and have been very happy with it. It is a reliable and efficient way to ignite my gas furnace. Here are a few reasons why I think a Bryant hot surface ignitor is necessary:
- It is reliable. A hot surface ignitor does not require a pilot light, which can be a source of problems. If the pilot light goes out, your furnace will not be able to ignite and you will be without heat. A hot surface ignitor, on the other hand, is always on and ready to go.
- It is efficient. A hot surface ignitor uses less energy than a pilot light. This is because the pilot light is constantly burning, even when the furnace is not in use. A hot surface ignitor only heats up when the furnace is turned on, which saves energy.
- It is safe. A hot surface ignitor does not produce any harmful emissions. This is because it does not use a pilot light, which can produce carbon monoxide. A hot surface ignitor is also less likely to cause a fire than a pilot light.
If you are looking for a reliable, efficient, and safe way to ignite your gas furnace, I highly recommend a Bryant hot surface ignitor.
My Buying Guides on ‘Best Bryant Hot Surface Ignitor’
What is a Bryant Hot Surface Ignitor?
A Bryant hot surface ignitor (HSI) is a small, electrical device that is used to ignite the gas in a gas furnace. It is typically located in the burner assembly of the furnace and consists of a ceramic rod that is heated by an electric current. When the rod reaches a certain temperature, it glows red hot and ignites the gas.
Why do you need a Bryant Hot Surface Ignitor?
A Bryant hot surface ignitor is an essential component of a gas furnace. Without it, the furnace would not be able to ignite the gas and would not be able to heat your home. If your HSI fails, you will need to have it replaced in order to restore your furnace to working order.
What should you look for when buying a Bryant Hot Surface Ignitor?
There are a few things you should keep in mind when buying a Bryant hot surface ignitor.
- Wattage: The wattage of the HSI is important because it determines how much heat the rod will produce. The higher the wattage, the hotter the rod will be and the more easily it will ignite the gas.
- Length: The length of the HSI is also important because it determines how far the rod will extend into the burner assembly. The longer the rod, the more likely it is to make contact with the gas and ignite it.
- Diameter: The diameter of the HSI is important because it determines how much gas the rod can flow through. The larger the diameter, the more gas the rod can flow through and the more efficiently it will ignite the gas.
How to install a Bryant Hot Surface Ignitor
Installing a Bryant hot surface ignitor is a relatively simple task that can be completed by most DIYers. However, if you are not comfortable working with electrical components, it is best to have a qualified technician do the installation for you.
To install a Bryant hot surface ignitor, you will need the following tools and materials:
- A Phillips head screwdriver
- A pair of pliers
- A new Bryant hot surface ignitor
- A piece of electrical tape
1. Turn off the power to the furnace at the breaker box.
2. Remove the access panel to the burner assembly.
3. Locate the old HSI and disconnect the electrical wires.
4. Disconnect the gas line from the old HSI.
5. Apply a small amount of electrical tape to the threads of the new HSI.
6. Screw the new HSI into place.
7. Reconnect the gas line and electrical wires.
8. Replace the access panel.
9. Turn the power to the furnace back on.
Troubleshooting a Bryant Hot Surface Ignitor
If your Bryant hot surface ignitor is not working properly, there are a few things you can check to troubleshoot the problem.
- Check the power to the HSI. Make sure that the power is turned on at the breaker box and that the HSI is properly connected to the electrical circuit.
- Check the gas line to the HSI. Make sure that the gas line is clear and that there is no blockage.
- Inspect the HSI for damage. Look for cracks or other damage to the HSI. If the HSI is damaged, it will need to be replaced.
If you have checked all of these things and the HSI is still not working, it is best to have a qualified technician diagnose and repair the problem.
Conclusion
A Bryant hot surface ignitor is an essential component of a gas furnace. If your HSI fails, you will need to have it replaced in order to restore your furnace to working order. By following the tips in this guide, you can easily install a new HSI and get your furnace back up and running in no time.